Floating the ground, 13 EC300

[edodd19]

I recently purchased a 2013 EC300. I want to convert it to DC power. From my research I need to float the ground. Does anyone have the exact procedure to do it on this bike? Believe it to be a Kouksan 2K3 ignition. I already have the regulator/rectifier from trailtech.

[slocalspode]

We talked about doing the floating ground in this thread.

http://www.gasgasrider.org/forum/showthread.php?t=528

But there is more (better) info in one of my later posts.

I'll have to do some searching to find it.

There is a wire in the 2K3 stator you have to de-solder and
re-solder to another location on the stator.
Then make sure all of your electronics, (except the CDI), to
the battery + and - terminals.
Make sure the isolate the rectifier/regulator housing from the
frame and ground only to the battery.
Maybe someone can search my past posts and find it.
Good luck. Jeff

[slocalspode]

I've searched everywhere I can think of that I might have
posted the AC_DC conversion topic.
ThumperTalk, SuperMotoJunkie, KDXForum and ADVRider

I know nothing ever leaves the "WEB", but, I can't find anything
I posted about doing the floating ground conversion.

I also did a DC conversion on my KDX240SM without doing a
floating ground to it's stator....

I did this maybe 10 years ago and my feeble mind can not recall
the details.
Sorry.

[slocalspode]

Send me a private message with an email address.
I found two .pdf files. One from Trail Tech and another
from Baja Designs on how to do the floating ground
on a 2K3 stator.

If your 2013 GasGas has electric start, I doubt, these will
be of help.
the file sizes are: 2.03 mb and 1.47 mb.

I was searching on their web sites and could not find
either of these files there anymore. the must have deleted
them.
Good luck.

[SS109]

Originally Posted by slocalspode

I've searched everywhere I can think of that I might have
posted the AC_DC conversion topic.

Is this the thread? http://www.gasgasrider.org/forum/showthread.php?t=1859

[slocalspode]

That is the one. Don't know why I could not find it.
I did not click the links to see if they still worked.

Edit: yup.... Looks like the links are dead.

If not, the OP can get a hold of me and I can forward
the two files I have.
Thanks SS109.