Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-06-2013, 04:45 PM
jdosher jdosher is offline
Member
 
Join Date: Feb 2011
Location: Seattle, WA
Posts: 56
Default Wrist pin bearing cross-over?

Is there a cross over part for the wrist pin bearing in the 300? This link leads me to think there is. http://www.powersportparts.net/Verte..._p/4170671.htm


Reply With Quote


  #2  
Old 02-06-2013, 04:56 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,992
Default

Vertex, Wossner, Wiseco ... They'd be available through all.

Generally though you just buy a complete piston kit which comes with pin, clips, rings and piston. Then I grab a new small end bearing just for good measure. FWW, the stock GG pistons are actually Vertex.
Reply With Quote
  #3  
Old 02-06-2013, 05:03 PM
rxmx rxmx is offline
Member
 
Join Date: Jan 2010
Location: mid TN
Posts: 36
Default

I measured mine and just ordered wiseco #B1003, 18mm x 22mm x 21.8
Same as YZ250 I think...but you may want to consult an expert!
Reply With Quote
  #4  
Old 02-06-2013, 06:19 PM
jdosher jdosher is offline
Member
 
Join Date: Feb 2011
Location: Seattle, WA
Posts: 56
Default

Jakobi, yep that's exactly what I was asking: I have everything but the small end bearing (aka wrist pin bearing).

rxmx - Great! Thanks. I'd read 18x22x22, which is the same as that Wiseco part. Just ordered one from amazon for $16, including shipping.

I love my GG, but you gotta think outside the box when sourcing parts sometimes :-) It's not like my girlfriend's KDX220 where I can hit one site and get everything I need (and more easily compare prices as well.)
Reply With Quote
  #5  
Old 02-06-2013, 06:34 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,992
Default

Sorry, saw the pic of the pin and jumped to conclusions. Seems you've found one now
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wrist Pin Bearing SpeedyManiac Enduro Engine - 2 stroke 16 10-08-2009 09:37 PM
wrist problems gascanuck Injury & Recovery 16 03-17-2009 07:49 AM
Wrist pin snap rings steve Enduro Engine - 2 stroke 9 04-08-2008 08:19 AM
lower shock bearing cross-ref? fasternat Enduro Suspension 1 02-21-2007 10:20 AM
Bearing kit cross??? Dingoe Enduro Suspension 4 12-14-2006 10:23 PM




All times are GMT -5. The time now is 08:21 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org