KX brake pedal, what year?

[sn22]

Hi All,
Just purchased my first GasGas yesterday. She's a '00 EC300 that was purchased in '01 as a leftover. I am the third owner. I am in need of a brake pedal and see from the crossover list that the KX works with modification. My question is what year KX and what is the modification? Also Im looking for a parts book and shop manual to download? I didnt see any on the main site that went back that far. Thanks, I look forward to contributing to this forum and Ive already rec'd alot of help from it!

[sn22]

Well I figured out tonight that it isnt my brake pedal that is shot it is just the fact that I am missing the return spring

[jeffd]

That's good to hear.

There are on-line parts fiche available back to 2000 model year at www.gofasters.com (a sponsor here).

jeff

[sn22]

Might anybody have a pic of where the brake pedal spring hooks onto the frame?
Thanks for the link to gofasters too!
Scott

[Dave]

There is a frame reinforcement (gusset) below the swingarm mount.
The gusset is open along the top and the spring drops in the "slot".

[sn22]

Thanks guys, Ill have the new spring tomorrow and now I know where to hook it to. Thanks!

[MattR]

Originally Posted by Dave

There is a frame reinforcement (gusset) below the swingarm mount.
The gusset is open along the top and the spring drops in the "slot".

I found a pic of a WEC bike showing the spring attachment. You will see it attach right near the swing arm pivot at the gusset like Dave mentioned.

http://berkyboy.smugmug.com/gallery/1667364/1/81684183

[sn22]

WOW, killer photos. Thanks.....I need that chain guide and the radiator guards. Is the end of that radiator guard threaded to accept the lower shroud mounting bolt?

[Triple W]

Does anyone know what year KX pedal fits a GG? And what mods need to be done?

[sn22]

I ended up rebuilding my stock gasgas pedal. Gofasters sent me the parts to rebuild the mounting point and I welded up the end because it was all rounded out and the tip was held on by the spring so my buddy carefully rebuilt the end with weld and I redrilled a new hole and put a new tip, spring and pin in it and its good as new and for alot less then a new brake pedal.