|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Fitting map switch to 200?
Hi all, My cdi is in my airbox it has a black and an orange wire that are unplugged. How do people fit a switch to change maps? Also what map is it running with wires out? Steve
|
#2
|
||||
|
||||
Unplugged is the soft map, if your able to solder wires together you can buy a switch and wire it up.
Otherwise I think you can buy a switch from GG which will plug in and work that way. |
#3
|
||||
|
||||
Plug them together and try it before you wire a switch, the difference may not even be noticable on the 200 depending on the jetting and how you ride it. Even on the 250 its hard to tell.
|
#4
|
|||
|
|||
do the black and orange wire allso apply to the ('00) EC300 CDI?
i would like it a litlle more smooth. i allready have the FWW. thanks guys, hannes. |
#5
|
|||
|
|||
anyone?
|
#6
|
||||
|
||||
I believe the dual map cdi was only introduced in 2005/2006
So no, unless you have a newer cdi you will not have a dual map. Sorry |
#7
|
||||
|
||||
Correct, only some '05 and later bikes. What you can do is jet it a little different, and retard your static timing a bit.
|
#8
|
|||
|
|||
My bike was in rain mode all along, as soon as the ice thaws Im back out!
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help! fitting FSE400 engine in kart, do you hav one? | Gi_GASGAS | Enduro Electrical & Wiring | 1 | 05-13-2010 12:52 AM |
fitting Clarke 3.2 tank to a '03 ec250 | flybars | Enduro Chassis & Body | 2 | 04-11-2010 04:57 PM |
Seriously contemplating switch. | REVERUP | General Discussions & Announcements | 11 | 11-14-2009 06:35 PM |
Fitting 05-06 clarke tanks on '07 FSR450 | gun | General Discussions & Announcements | 4 | 06-05-2009 03:39 AM |
fitting KTM rear wheel to Gasser | moto520 | Enduro Chassis & Body | 3 | 03-19-2007 07:42 PM |