|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
2014 clutch master HELP
Hey guys, I'm in panic mode right now.
Yesterday my clutch started feeling soft on my 2014 XC300RE, and I can see some fluid leaking past the seals on the clutch master. I need to get parts to make it functional ASAP. Losing riding days is a horrible prospect. I've spent time searching, and from what I can tell, My master should be an AJP 9.5mm bore mineral oil. Option 1: rebuild kit. I'm not seeing any in stock / available on this side of the planet (I'm in Canada) Option 2: Can a more available master be swapped from a KTM? I read mixed info on this. Sounds like the master end of my hose wouldn't connect to a KTM/Magura master? Would need the KTM hose? Any advice would be greatly appreciated. There is a KTM dealer not too far away, if I could make something fit using the KTM parts, it would possibly be the fastest solution. Just not sure what to look for.
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#2
|
||||
|
||||
If I am correct, this would be the appropriate rebuild kit for my master?
https://www.ebay.com/itm/AJP-MINERAL...IAAOSw49JevZK7 Shipping from the UK would put a huge dent in my spring riding season
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#3
|
||||
|
||||
There are two different Magura master cylinders.
To be sure, the hose sealing ends will have to match up. The threaded part in the same. This style one, I installed on my 2011 GG. Using the GG OEM hose. https://www.ebay.com/itm/05-07-KTM-5...QAAOSwh3xer3Jd On my '15. I used this style one, with the GG OEM hose. https://www.ebay.com/itm/Magura-Clut...cAAOSws6tekauH |
#4
|
||||
|
||||
Quote:
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#5
|
||||
|
||||
This one fits my 15, with oem ajp master cyl.
Check hose part # for 14 & 15 should be the same. Find someone close that has it in stock. Stock on some ktm's ... thinking 14 200 maybe? https://www.ebay.com/itm/Magura-2000....c100005.m1851
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
#6
|
|||
|
|||
The ALL BALLS Racing kit #18-4003 worked in my 2014 EC300, its listed on the western power sports site as a 21-84003. Gasgas parts guy has them as well. When you rebuild it and go to bleed it, do yourself a favor and heat your oil before putting it in the master cylinder. I was having a heck of a time getting mine to bleed. It just kept pumping bubbles that would hang at the bottom of the master cylinder and then get sucked back down. When I heated up the whole cylinder with a heat gun, they all came to the top in no time. I wouldn't go crazy with the heat, maybe 120-150 degrees(american, not canadian degrees).
|
#7
|
||||
|
||||
Thanks for the pointers fellas.
My master cyl is dripping lightly, but I think I should be able to keep topping it off for the short term. I ordered a rebuild kit from Mattos (blindly, no clue if / when it will arrive). But, I will probably want to convert to a KTM / Magura for easier to get parts down the road.
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Clutch master cyl | cladoo | "Wanted to Buy" & "Want To Trade" | 0 | 10-27-2018 03:13 PM |
2014 rear brake master cylinder | 95jersey | Enduro Chassis & Body | 3 | 03-08-2016 12:58 PM |
AJP clutch master | desertgasser300 | "Wanted to Buy" & "Want To Trade" | 1 | 04-05-2013 10:34 AM |
Help Please! Clutch Master | Jakobi | Enduro Chassis & Body | 5 | 07-07-2011 08:46 PM |