|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ohlins Rear Shock oil change and regassing
Is there a manual anywhere for servicing the rear shock ?
What tools do I need etc I have searched the net but to no avail so far K
__________________
08 TXT 300 06 Gasgas EC200 03 Gasgas EC300 05 Pampera 250 |
#2
|
|||
|
|||
Procedure wise, the following article pretty much covers the tear down and reassembly except for the piston reservoir.
http://dirtbike.off-road.com/dirtbik....jsp?id=266765 I've never found a service manual for the Ohlins shock. Last edited by Dave; 01-23-2008 at 03:22 PM. Reason: typo |
#3
|
||||
|
||||
You may have already came across this but this is the only manual I found in my searches of the web.
Its basic stuff but may help. http://www.ohlins.com/Motorcycle/Pro...0/Default.aspx Click on: MX/Enduro/Off-Road shock absorbers Trial/Off-Road shock absorbers They are PDF files. I do know that you need a special needle to insert to fill with gas. I spoke with a friend who does alot of suspension work and he drills and taps for a schrader valve so it makes adding the gas more universial. |
#4
|
||||
|
||||
Quote:
Have you tried this manual? It was listed in our manuals section off our main page. http://www.gasgasrider.org/ohlins_shock.zip
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 |
#5
|
||||
|
||||
That manual (http://www.gasgasrider.org/ohlins_shock.zip) has nothing to do with Ohlins maintenance. Just theory of operation.
I just took apart my shock last week (first time), and changed the fluid. It's really easy, no special tools needed (other than the needle, gas, and regulator to charge the reservoir). It's like any other shock. The only tricky bit is to make sure you set the piston height/depth to where it was upon disassembly. Bleeding the shock is like any other. I took a few photos when I did mine, so I could write something up if you're interested. I also measured piston depth if somehow that is lost. I am the second owner of the bike, but the first owner kind of hacked up the shock. I am not sure how that happened as they are quite easy to work on. blitz |
#6
|
|||
|
|||
Quote:
Thanks Fergus |
#7
|
|||
|
|||
KTM still rule
|
#8
|
||||
|
||||
FYI - Someone recently sent me a complete ohlins service manual in pdf. I will post it on the website in the next couple of hours...
jeff p.s. Mr Odonovan - if you don't have something constructive to add - please don't post. |
#9
|
||||
|
||||
An ohlins shock workshop manual showing complete disassembly and reassembly can be found at : (do right click "save link as" - it is almost 5 megs so be patient).
www.gasgasrider.org/ohlins_workshop.pdf Many thanks to "gaser" for this contribution. I'll add a link to it on the main website. jeff webmaster gasgas riders club |
#10
|
|||
|
|||
That is excellent. Many thanks for posting that.
Fergus |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ohlins rear shock problem | reeve | Enduro Suspension | 14 | 06-01-2014 11:03 PM |
07 ec250 will 05 ohlins rear shock fit | gasgasandrew | Enduro Suspension | 1 | 01-22-2010 04:39 PM |
MC65 rear wheel bearing change | bergerhag | Enduro Chassis & Body | 0 | 03-12-2008 03:16 PM |
Oil change time-which viscosity=fork/shock | motorhead | Enduro Suspension | 5 | 10-04-2007 06:56 AM |
ohlins rear shock broken! | tommo | Enduro Suspension | 4 | 05-07-2007 07:15 AM |