|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Swapping out the AJP for a Magura?
Has anyone done this? From what I understand, the Magura runs mineral oil while mine, the AJP, runs DOT 4. What obstacles would be in the way of doing this?
Preferably, I'd like to just swap out the master and keep the hose and slave as they are. It doesn't necessarily have to be a Magura, but I am finding it difficult to locate another brand that offers a DOT 4 clutch master. Last edited by GGRider01; 08-22-2015 at 11:00 PM. |
#2
|
|||
|
|||
Quote:
|
#3
|
||||
|
||||
All the AJPs I've had on my bikes use Mineral oil.
Does yours have a green top? |
#4
|
|||
|
|||
I used a Magura on my husqvarna, and this AJP on my 2013 is by far the smoothest easiest pull of any bike I've ever owned.
__________________
2013 GasGas XC300E 2005 YZ290 1973 Honda CB175 1997 KX60 1983 Yami Tri-Zinger 1984 Suzuki Alt 50 1969 Trail 90 1971 Trail 90 1972 Trail 90 |
#5
|
|||
|
|||
Mine states DOT 4 right on the cap, which is black. I'm mostly wanting to swap for something a little more rigid. Mine swivels about the bars pretty easily and can't be tightened any further. A new clamp is not cheap and AJP America doesn't seem interested in selling to individuals. I think dealers are a racket and generally avoid them if possible. I'll probably end up ordering through a dealer, if it beats online prices of 40 freakin dollars for a sheet metal clamp. That is, if AJP really is the lightest clutch out there.
|
#6
|
||||
|
||||
You can wrap plumber's teflon tape around the bar to take up the slack.
|
#7
|
|||
|
|||
I do this on clutch and brake because then they are firm but can still be adjusted without tools - I always tend to need to adjust them
__________________
2003 txt250 Pro 2013 Ossa 280i |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
13 300 magura lever crossover | BSM2 | Enduro Chassis & Body | 3 | 05-20-2015 02:22 AM |
Updating hyd clutch AJP to Magura??? | boardrider247 | Enduro Engine - 2 stroke | 8 | 05-30-2014 06:34 AM |
Swapping frame from 250cc to 300cc? | Motomoto | General Discussions & Announcements | 3 | 07-30-2013 08:11 PM |
Swapping ohlins for marzocchi forks | kendunn | Enduro Suspension | 2 | 12-06-2009 05:12 AM |
Magura clutch master cylinder on a GG??? | ktmguy23 | Enduro Engine - 2 stroke | 12 | 04-20-2009 12:44 PM |