|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Rear Brake Pedal
My rear brake pedal is getting a bit sloppy. I remember reading a thread
some time ago about putting in a brass bushing in the pedal? I did a search, no luck. Thank
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#2
|
|||
|
|||
You can purchase the bushing seperately. Look at the parts fiche on gofasters or download the parts manuals from gasgas.com. It is listed in the detail for the "frame".
jeff |
#3
|
|||
|
|||
I found a bushing at LOWE'S that worked perfectly. I bought one that was slightly smaller on the bolt side and was able to drill it out to fit.
J |
#4
|
||||
|
||||
FYI - The gasgas bushing lists for something like $5...
jeff |
#5
|
||||
|
||||
Thanks...I'll have to give Mark or Steve a call.
Thanks
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
roller bearing rear brake pedal | mxdj2003 | Enduro Product Announcements | 25 | 12-16-2008 09:29 PM |
Rear brake pedal | HydroDog | Enduro Chassis & Body | 0 | 03-09-2008 10:48 PM |
2002 rear brake pedal | kevin849 | Enduro Chassis & Body | 5 | 03-07-2008 12:08 PM |