|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
06 300 jetting
2006 ec300 I have taken part the carb and have found the following
needle NIEF clip on 3rd position 185 for the main jet 42 for the pilot jet #7 slide bike was set up for winter riding when I got it,got hurt in the spring and didnt use it till fall when the temps were down,the bike always runs great down low and idles fine,but still need to clean it out when you get to a straightaway,now that the temps are in the high 80s and humid it worse than ever,thinking of dropping the main to a 175 and check it out,may even drop the clip one notch,I fouled a plug today and luckily it was right back at my truck,dont want it too happen during the next race,might even call les for his kit if the lower main doesnt fix it |
#2
|
||||
|
||||
Kevin, I think I'd try the 180 main first and maybe raise the clip if you need too.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
where to go from here. jetting q. | dank | Enduro Intake/Carburetion - 2 stroke | 105 | 04-11-2011 04:25 PM |
LTR or JD Jetting Kit | Elvis74 | Enduro Intake/Carburetion - 2 stroke | 7 | 04-08-2010 02:49 PM |
04 ec 300 Jetting | lordfeyr | Enduro Intake/Carburetion - 2 stroke | 12 | 01-26-2010 03:16 AM |
Need help jetting an 06 EC 250 | piperpilot12w | Enduro Intake/Carburetion - 2 stroke | 3 | 11-16-2008 11:19 PM |
jetting help for 05 300 please... | mackmack | Enduro Intake/Carburetion - 2 stroke | 5 | 09-03-2007 05:10 PM |