Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-17-2011, 02:56 PM
Woodsknight Woodsknight is offline
Member
 
Join Date: Feb 2011
Posts: 14
Default Changing Electric start to two kill buttons

Topic says it all. How do I get rid of the bulky estart/headlight/turn signal unit switch and replace it with a kill button and an Estart button. I bought two Yamaha style kill switches. I wanna put a kill button on the left side and a kill button on the right side (this will be used for the Estart button). I understand that I will lose the high/low switch for the headlight. I dont care about that.
Hope someone can shed some light. Thanks


__________________
2011 EC300e
Reply With Quote


  #2  
Old 03-17-2011, 05:02 PM
Neil E. Neil E. is offline
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,418
Default

Engine kill: Yellow/White wire is connected to Yellow/Green wire via your new button.

Engine start: Black/White wire is connected to Red wire via your new button.

This is based on the wire colours in the multi-function switch harness (at the connector socket). I assume you'll connect to these wires.

The chassis wiring plug has the identical colours. (edit: I checked to be sure)

Above info based on 2011 250XC with estart.
__________________
2011 EC250E

Last edited by Neil E.; 03-17-2011 at 06:13 PM.
Reply With Quote
  #3  
Old 03-18-2011, 04:19 PM
Woodsknight Woodsknight is offline
Member
 
Join Date: Feb 2011
Posts: 14
Default

Thanks Neil!! Hey maybe you can help me out of another jam? Do you know the stock shock clicker settings (or ballpark) on the 2011's? I changed my rear spring and messed up the setting.
__________________
2011 EC300e
Reply With Quote
  #4  
Old 03-19-2011, 09:20 AM
Neil E. Neil E. is offline
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,418
Default

No idea on the suspension (I haven't looked at mine yet). The snow has only just melted here. Trails won't open for another 4-6 weeks. Are the specs somewhere in the owner's manual?
__________________
2011 EC250E
Reply With Quote
  #5  
Old 03-19-2011, 10:28 AM
Woodsknight Woodsknight is offline
Member
 
Join Date: Feb 2011
Posts: 14
Default

I couldnt find anything in the settings. I set it at 31 out. I think thats close to where it was
__________________
2011 EC300e
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
New 2011 Gas Gas EC 300 (Electric Start) onegreyghost General Discussions & Announcements 32 08-31-2010 07:23 PM
GGOR Questions : 2T Electric Start Specs & Direct Injection Neil E. General Discussions & Announcements 18 08-28-2010 09:54 AM
electric start 2 Banger Gas Gas Klausen Enduro Engine - 2 stroke 1 06-21-2010 06:19 PM
Electric Start EC300 J D General Discussions & Announcements 25 02-22-2010 03:12 PM
Kill Switch Dingo Enduro Electrical & Wiring 4 12-10-2008 04:23 PM




All times are GMT -5. The time now is 05:19 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org