|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
99' EC 200 Countershaft/ sprocket seal
It looks like I have a counter shaft seal leaking. I'm going to tear into it today and was hoping that someone could give some input on KTM parts that will fit this Gasser. Or other companies that fit.
I have downloaded a shop manual for this bike, but it's not very detailed. I have looked at interchange list, and didn't see this seal on the list. |
#2
|
||||
|
||||
You need to get the seal, 2 o-rings and the spacer thing (dont know what they call it) replace ALL of ti or it will start leaking in no time. I would just call Halls cycle not worth trying to get this part here and that part over there.
__________________
02 EC 200 03 MC 250 88 VT 800 01 TXT 280 |
#3
|
||||
|
||||
Quote:
Right now, it seems I found a fix. I have an extra motor that came with the big. It is split and torn down completely, I was able to pull the seal, o'rings and spacer from it. All were in good shape, so scares or splits and wasn't dry rotten. So I put them in and was a good fix for NOW, plan to replace new. This is why I love this site. Some items are good to interchange and others are just a phone call away from Hall's. I just don't know what items are that way and which ones need to be GG items. Thanks |
#4
|
||||
|
||||
Wow, didn't expect $77 for the seal, o'rings and spacer. I was thinking maybe $40.......
|
#5
|
||||
|
||||
Quote:
Found the parts book here: http://www.gasgasmotos.es/en/manuals/6.html |
#6
|
||||
|
||||
Quote:
The spacer is the expensive part, at $35 just for it. I'll look and see what I can find locally. I don't mind paying if I have to, just didn't expect $70+ for this item alone. Makes me wonder about future issues I might come across.... |
#7
|
|||
|
|||
They pretty durable so not that many issues to deal with.
__________________
11 Husaberg 570 12 Husky 310 97 Gas Gas JTX 270 trials 10 Beta Evo 290 trials 02 E440 Cannondale plated |
#8
|
||||
|
||||
I have had good luck with cleaning the grooved spacers with fine sand paper. You can also drive the seal in a little less deep than the original so the new seal lands outside the original grooves. Worst case you replace the spacer later.
|
#9
|
||||
|
||||
Quote:
I might just need to order new seal and o-rings and go from there for the next change.
__________________
"There is no room in life for Regret, it's a useless feeling that leads to a negative attitude" I would rather call it the "Stupid Tax"! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Countershaft/Sprocket seal leaking on '12 250R | Novascotiarider | Enduro Engine - 2 stroke | 14 | 04-19-2013 05:00 PM |
countershaft sprocket | bones150 | General Discussions & Announcements | 9 | 05-30-2012 11:22 AM |
Countershaft sprocket seal assembly | 3hunerd | Enduro Engine - 2 stroke | 5 | 04-01-2012 08:21 AM |
Countershaft sprocket shim | 3hunerd | Enduro Engine - 2 stroke | 5 | 03-24-2012 09:29 AM |
Countershaft seal replacement | kendunn | Enduro Engine - 2 stroke | 4 | 11-09-2009 07:58 PM |