#1
|
|||
|
|||
Kickstart
I know this has been discussed many times on this forum, but I couldn't find an answer for my year of bike.
I have an 08 EC 300 and wondered if anybody had replaced the kickstart with the 09 YZ 250 item part no. 5NX-15620-00. I have seen threads with the YZ part fitted to older bikes, but not to an 08 model. I assume it will fit, as the engines have changed little year to year, but would like a definitive answer before I shell out the money. Can anybody help? Thanks. |
#2
|
|||
|
|||
I have an 07 and it fit perfectly. AFAIK 07-09 are the same bike.
|
#3
|
|||
|
|||
Hi Mattnzl, thanks for the reply. I can now replace my floppy original.
|
#4
|
||||
|
||||
As far as I know, all GG EC200/250/300 kickstarts have the same splines. When my 06 EC200 kick broke off, I replaced it by the new GG 13 model kickstart.
Sent from my OMNIA7 using Board Express
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#5
|
|||
|
|||
i got the YZ kickstart on my 2000 300ec...... much better than the OEM
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how do you remove the kickstart | noobi | Enduro Chassis & Body | 13 | 09-22-2011 03:31 PM |
Kickstart problem | gasser250sm | Enduro Engine - 2 stroke | 2 | 07-04-2009 03:16 PM |
Kickstart | steve | Enduro Engine - 2 stroke | 6 | 04-08-2008 03:09 PM |