|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2k3 stator mounting plate
I have an '04 MC250 with a 2K3 stator. It recently pooped the bed and I replaced it with one from a 2015 Husky. Upon removal, I broke the tabs that hold the pick-up on the backing plate. I got a handful of rides out of some generous amounts of JB weld, but it finally broke loose. Does anyone know if you can get the mounting plate by itself? Or do I need to buy an entire stator? Does anyone have one I can buy?
|
#2
|
||||
|
||||
Like this? Edit cant attach, probably too big.
I got the whole plate with stator. Just keeping this for the pickup coil. I could cut it all off and send you the plate for cost of postage. But its from New Zealand so keep it in mind if no one has one closer. And we're in semi lockdown so I cant walk into a post shop for a couple of weeks. And Freight is a bit slow international due to lack of passenger planes. Try get local welding guy to tack it together. I've had that work for a while at least
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#3
|
|||
|
|||
I?m going to order a KTM one in through the dealership I work at. It allegedly comes together. I?ll just have a spare stator if it works out. If it doesn?t, I may be sending you some postage!
|
#4
|
||||
|
||||
Yeah I bought a Electrix from the UK via Auss distributor. Came with everything. Cheap and supposedly good quality. Funny to trust the English for Electric components, but post war Triumphs were a very long time ago.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
broken stator plate | Getoviq95 | Enduro Electrical & Wiring | 16 | 02-20-2017 11:06 AM |
Stator Plate | GGRider01 | "Wanted to Buy" & "Want To Trade" | 0 | 06-24-2016 01:40 PM |
WTB Stator Plate for K3 (Large Ignition) | Jim Cook | "Wanted to Buy" & "Want To Trade" | 2 | 05-20-2014 09:31 AM |
ECU mounting | GavGav | Enduro Engine 4 stroke (including EFI & Exhaust) | 7 | 05-20-2011 07:03 PM |
Moose skid plate mounting | Captccb | General Discussions & Announcements | 0 | 03-31-2007 04:25 PM |