Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-29-2008, 03:44 PM
nickrhinos nickrhinos is offline
Member
 
Join Date: Jul 2008
Posts: 2
Thumbs up Project Bike

Hi nickrhinos ,Newbie , I have a 1990 325 air cooled Gas Gas project . I am in need of workshop /owners manuals and photos , plus contact with somebody who knows this model , cheers Nickrhinos


Reply With Quote


  #2  
Old 07-29-2008, 05:35 PM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 450
Default

If you are in the USA, and maybe even if you are not,
check out: http://www.gasgasmuseum.com/
and talk to Jim Snell.
http://www.gasgasmuseum.com/1991-1993gasgas/index.htm
If this what you have?
Good luck on a parts / shop manual.
If all else fails. Study up on your Spanish and try the source:
http://www.gasgasmotos.com/esp/frame.htm
-----------------------
You might give Mike Komer at the Tryalsshop a call too.
http://www.tryalsshop.com/
He has helped me with parts for my 1990 Aprilia Climber.
Cheers, Jeff So. Cal.
Reply With Quote
  #3  
Old 07-30-2008, 01:17 PM
nickrhinos nickrhinos is offline
Member
 
Join Date: Jul 2008
Posts: 2
Thumbs up Project Bike

Hi Jeff , Thanks for your reply . I have sent an e- mail to Gas Gas Museum . The closest to my model is the green and purple ?? 125 [the bikes must have being good because the colours were not]. Have found some parts suppliers over here in the U.K. it's just the problem of getting hold of technical information that is the hurdle I need to overcome now . Once again thanks , Nickrhinos
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
My latest project finished cladoo General Discussions & Announcements 23 01-09-2011 10:46 PM
project Ducati boostedte37 All Other Bikes... 66 09-18-2010 07:53 PM
Project GAS GAS 125 GAS GAS UNLIMITED General Discussions & Announcements 2 10-22-2008 03:58 PM
Machining Project Part 2: Bar Mounts SpeedyManiac General Discussions & Announcements 2 03-06-2007 07:47 PM
Machining project part 1: New Oil plugs SpeedyManiac General Discussions & Announcements 9 02-06-2007 07:35 AM




All times are GMT -5. The time now is 05:39 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org