|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Sprocket size for 2011 6days 300?
Went to a 50T from 48 on my 250 and love it. Considering a 49 or a 50 for my 300. Any suggestions?
|
#2
|
||||
|
||||
Here is a cheap way to try a steel 49 tooth rear. $19.99 at Rocky Mountain. I ran one on my 300 gasser and it fit perfectly.
http://www.rockymountainatvmc.com/pr...=&sizeAttr=484 |
#3
|
||||
|
||||
Made the move from the 48 to the 50T on my 2010 300. Its nice. I found I don't need to be moving back to 1st as often in the tight stuff, or abusing the clutch so bad in the really tight stuff, but most of all I noticed it just lets the bike keep on singing a bit more easily. With the 48 if you didn't change right at the top end you'd kind of drop off the pipe a bit.
|
#4
|
||||
|
||||
Ordered the 50 Ironman. If not happy it will be a spare for the 250 and I'll try a 49.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2011 Carb Size 36 or 38 | BrentMartell | Enduro Intake/Carburetion - 2 stroke | 15 | 05-23-2011 09:25 PM |
ohlins size | boostedte37 | Enduro Suspension | 6 | 12-05-2010 04:51 PM |
Rim Lock Size? | Boomhauer | Enduro Chassis & Body | 4 | 09-17-2008 09:25 AM |
Nut Size | steve | Enduro Engine - 2 stroke | 2 | 01-11-2008 10:58 AM |