|
|
|||||||
| Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
|
Thread Tools | Display Modes |
|
#1
05-04-2016, 07:03 PM
|
|||
|
|||
How to know if the bike is running lean?
Hello GG riders!
I purchased a gas gas ec 250 2006 a few days ago from a family member with a spluttering problem. Basically it would start first kick every time but the bike would splutter very bad at anything more than 10-20% throttle, I solved this by running a hotter plug (br9) and changing the mixture from 40:1 to 50:1. Now I am afraid the bike is running lean, I put a fresh plug in and took it for a test ride for approx 5 minutes and the plug was a very light colour, yellow/white colour which I believe means it is lean? Is there some sort of trick to finding if it is lean? If it is lean how do I go about making it richer? My settings: Pilot: 42 Main: 172 Needle: #3 Needle type is "N1EF" 
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Blue/Yellow Wire on ECU/running lean???? | Why Z? | Enduro Engine 4 stroke (including EFI & Exhaust) | 4 | 10-02-2015 04:22 PM |
| Am I rich or lean? | pscook | Enduro Intake/Carburetion - 2 stroke | 6 | 08-01-2012 10:17 PM |
| Is this a bit lean or ok | Simmo737 | Enduro Intake/Carburetion - 2 stroke | 7 | 09-11-2011 05:02 AM |
| Bike running poorly need some help!!!! | Silver | General Discussions & Announcements | 19 | 08-09-2010 08:05 AM |
| Bike running hot - check impeller? | stay_upright | Enduro Engine - 2 stroke | 8 | 07-10-2008 07:49 AM |
Threaded Mode