|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
First ride 6dayz
Got put in a good enduring ride today on my 2011auto six Dayz.....awesome bike.
So what is up with the clutch. Why is it so grabby? It it an oil flow issue? Rob
__________________
www.synergyseals.com 209-938-9726 Being BOLD is BOLD! However, being confident is certain! Ride with confidence again! Made in the USA |
#2
|
|||
|
|||
Mine isn't grabby but will squalk every once in a while. There is a long thread on the clutch from months ago and I think it was just a harmonics issue. It may have had something to do with oil flow also just can't remember. I know the bottom line was don't worry about it they a very tough and last a long long time. I also know Clay said the new 12's had a revised cover etc. that should stop the squalking. So which Six Day do you have?
|
#3
|
|||
|
|||
Barnett basket fixed mine
|
#4
|
||||
|
||||
play with the adjuster at the master cylinder. basically the lever throw needs to be as long as possible. and back the clutch lever stop way way out.
also - what fluid are you running in the trans? i've never had one squawk yet. i have had grabby for sure though. adjusting the lever made it much better. it is also possible tht bleeding the system will make a better feel - but try adjustment first... there's a thread for clutch issue - also i noticed my 07 has holes in the spring pockets for oil flow. the earlier models i have do not. if you watch the progression of changes with the basket/hub/etc it looks like gg has been progressively searching for a squawk fix...
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
#5
|
||||
|
||||
NV
The plates just need some "ranch abuse" and then they will behave
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public |
#6
|
|||
|
|||
Read Berky Boy's post concerning this. I did everything he suggested (machined basket, drilled 36 holes in the hub, and started using Rotella), it helped tremendously. I made the holes in the inner basket about twice the size they were stock. No more noise and way less grabby.
|
#7
|
|||
|
|||
My ride is a 300.
I was going to change out the fluid with Mobil red cap synthetic first. I will look into adjustment also. I only notice it when the bike is hot. It seems like an oil thing. Thanks everyone. Btw...the bike is awesome! It holds the ground like velcro
__________________
www.synergyseals.com 209-938-9726 Being BOLD is BOLD! However, being confident is certain! Ride with confidence again! Made in the USA |
#8
|
||||
|
||||
There is a new clutch cover on the 12's that will fit the older models. It has a funnel kind of shape built into it that is supposed to channel oil into the clutch much better. I was told that this would help give the clutch lever a lighter feel and better longetivity.
|
#9
|
|||
|
|||
Quote:
__________________
www.synergyseals.com 209-938-9726 Being BOLD is BOLD! However, being confident is certain! Ride with confidence again! Made in the USA |
|
|