|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
It would be better to weld it.
There's not enough material in the frame there to thread into. |
#2
|
||||
|
||||
I agree there is not enough material and the threads will pull out and you will be very unhappy.
|
#3
|
|||
|
|||
Thanks guys.. That's exactly what I was afraid of. Will weld it... I than I can use good looking billet pegs frok ebay for few bucks 😂
|
#4
|
||||
|
||||
You can use good looking billet pegs anyway. You just buy the Yamaha type. They will fit your frame (if the frame isn't damaged, that is).
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#5
|
|||
|
|||
But I have really damaged mounts too 😪😪
|
#6
|
||||
|
||||
You can use the bolt on foot peg mounts off an aluminum frame dirt bike.
Cut you mounts off and weld the mounts on. |
#7
|
||||
|
||||
I found this link on Ebay which includes a WR footpeg mount with the kickstand bracket. You use the holes and edges for welding to the GG frame.
another option is to just get the two smaller YZ mounts that do not include the kickstand bracket. https://www.ebay.com/itm/2008-Yamaha...sid=m570.l1313 Makes me wonder if this is a good option if you want to get away from the GG switchblade. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Footpegs? | 95jersey | Enduro Chassis & Body | 4 | 04-15-2016 10:00 AM |
S3 Footpegs | bazzagas | Enduro Product Reviews | 2 | 04-27-2012 12:39 AM |
footpegs | davedunaway | Enduro Chassis & Body | 17 | 02-15-2011 12:29 AM |