GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #31  
Old 01-16-2018, 02:37 AM
expirmininkas expirmininkas is offline
Member
 
Join Date: Nov 2017
Posts: 6
Default

Hi,

Thank you for reply. Well, I took the bike to the forest lately And when it is running, it "wants to go up on wheelie" on the 3rd gear. However, if for any reason engine shuts down, it is very difficult to start it again - it doesnt not start, later it fires, and if I open full throttle during starting process, it seems like starter stops its work (to be short: opening full throttle kills starting).
If I wait for a ~ minute, in mostly cases I can start the engine. Maybe it is normal for GG?
I remember having Yamaha XT660R - I could start it again after engine shutting down immediately during riding, even when I am still on the bike


Reply With Quote


  #32  
Old 01-16-2018, 09:57 AM
Tafka Tafka is offline
Senior Member
 
Join Date: Feb 2015
Location: Estonia
Posts: 100
Default

Yeah, the hard starting sounds familiar
If you try to start, are you touching the throttle? If yes then DON'T!
There's two ways to start GG:
1) ignition ON, wait until the fuelpump primes and then hit the start button.
2) If after 2-3 tries no luck then: ignition on, fuel pump primes and then turn the throttle fully open and then hit the start button.
Moving the throttle during starting is NO-NO
Is your starter okay? I had also some problem when starter clutch was slipping....
But yeah, injector and TPS could be also issue
Reply With Quote
  #33  
Old Yesterday, 01:53 AM
expirmininkas expirmininkas is offline
Member
 
Join Date: Nov 2017
Posts: 6
Default

Thank you!

So, throttle should be opened beforing pushing starting button, if the bike failed to start in 2-3 times?
Reply With Quote
  #34  
Old Yesterday, 05:24 AM
Tafka Tafka is offline
Senior Member
 
Join Date: Feb 2015
Location: Estonia
Posts: 100
Default

Yep, hold full throttle and then push the start button. Worked for me
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
400 FSE will not idle when hot Gordonian Enduro Engine 4 stroke (including EFI & Exhaust) 5 08-30-2016 10:49 AM
'05 450 FSE Gear Stick/Engine Stall... bhambaker Enduro Engine 4 stroke (including EFI & Exhaust) 9 04-07-2016 11:50 PM
ec 300 2005 won't rev high nor idle... hannesd Enduro Engine - 2 stroke 23 12-17-2012 02:52 AM
300 won't idle. Please help!! stemplin Enduro Intake/Carburetion - 2 stroke 32 04-05-2012 08:28 AM
can,t get idle up geno Enduro Intake/Carburetion - 2 stroke 1 04-18-2010 09:49 PM




All times are GMT -5. The time now is 02:39 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org