![]() |
|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Cant seem to find a forum on what oil guys run in there gas gas bikes. I have a 2008 EC 200 and usually run lucas oil in my transmission (10w-40) as well as their mix oil. The oil I run is pretty expensive. is it worth running the more expensive oil? what do you guys use?
|
#2
|
||||
|
||||
![]()
For the last 12yrs in our eight 1998 to 2004 GG bikes we have run a 50/50 mix of ATF and T6 or Delo truck oil in the trans and it works perfect and it is cheap if you buy the big container of the truck oil. I think ATF is too thin
We run Klotz R50 if we are riding fast with lots of wide open areas and we rund Klotz Supertechniplate for general trail riding. I spoke with a Klotz engineer and he told me it was ok to mix the two Klotz oils/fuels which we regularly do since our riding changes from trip to trip. |
#3
|
|||
|
|||
![]()
My 98 been 10/40 Synth and been good. I've even used 5/40 cause thats what I run in my truck and what I had. Clutch grabs if starting in gear, no biggie, Shifts smooth and never slips. But maybe I'll try some ATF mixed in??
|
#4
|
||||
|
||||
![]()
Eel oil.
Nothing is slipperier.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#5
|
||||
|
||||
![]()
I've been running ATF Type F in my Kawasaki and Gasser bikes forever.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#6
|
|||
|
|||
![]() Quote:
for my ec300 i always used Belray gearsaver oil and never had any clutch issues, even helped the 2010+ clutch squeal issue
__________________
2003 txt250 Pro 2013 Ossa 280i |
#7
|
|||
|
|||
![]()
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
![]() |
Thread Tools | |
Display Modes | |
|
|