|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Red and yellow led light on speedo unit
Ec 250e 12 mod
Went to start the bike, turned the key on and briefly the red and yellow led lit up then the display went blank. I suspect it's the speedo battery, I assume it has one,as I done a search on here and Google and can't even find what type and if the red/yellow is a fault code as such! |
#2
|
|||
|
|||
Look here and see if it is one of these:
http://www.trailtech.net/digital-gauges If so download a manual to find out more info. The red and yellow are usualy programmable temperature warning lights or programmable shift indicators.
__________________
2011 EC250E |
#3
|
|||
|
|||
Cheers for that.
Had a look and there's no ref to it on there manual. Just been out to check couple things as it was fine before I took it for mot, the guy tried doing me a favor and had quick look at parking light, so thought he might of left something unconnected but all looks ok. Now it's dark , when I first turn ignition on, the amber and red light flash once, the back light is lit but there's nothing in the display, if you look hard u can see very very faint nos, I suspect it's the battery ( but funny how low battery is not displayed) have taken the battery out and it still does the same. Must get a secondary feed of the main battery as well. |
#4
|
|||
|
|||
Replaced the battery and still no go..
Went out yesterday, washed the bike today and hey presto |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need speedo unit... | brider | Enduro Chassis & Body | 1 | 05-18-2013 09:50 AM |
'06 300 Speedo problems. Should turning of front wheel switch unit on? | Jaluka | Enduro Electrical & Wiring | 4 | 09-25-2011 01:04 AM |
CLock/Speedo unit not working | Chilli | Enduro Electrical & Wiring | 16 | 04-27-2009 03:33 PM |