|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
needle with no markings...
just bought an ec 250 and for grins, wanted to pull it down to see how it was jettd. the bike runs awesome and was a local bike.
pilot and main jet, markd just like i figured, slide is a #7, but the needle has no visible marks at all. I have an ltr and an oe needle and they are both markd in the same general place, but this one has nothing. any ideas ???? ever seen a needle with no marks?? the bike is a rocket, just wanted to see what needle it was. thanks in advance jay
__________________
broken down over 60 slow rider.. |
#2
|
||||
|
||||
The early LTR needles did not have any markings.
|
#3
|
||||
|
||||
that would make sense. the guy i bought this bike from sells some parts to les at times so i bet it is.
__________________
broken down over 60 slow rider.. Last edited by jhendr3702; 03-18-2009 at 09:39 AM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What needle is this? | bitoman | Enduro Intake/Carburetion - 2 stroke | 4 | 07-28-2009 04:26 PM |
Shock spring weight markings - where? | stay_upright | Enduro Suspension | 3 | 04-12-2009 12:15 AM |
Where are rear shock weight markings? | stay_upright | Enduro Suspension | 0 | 04-11-2009 05:38 AM |
IMS Tank markings, and PV spacer measurements | Dingo | Enduro Engine - 2 stroke | 6 | 01-22-2009 12:51 PM |
What needle? | 2 strokes 4 life | Enduro Intake/Carburetion - 2 stroke | 8 | 08-22-2008 07:03 PM |