|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
2001 EC250 Service Manuel
Anyone know where I can go to get a service manuel to download for the '01 EC250? I tried searching with no results.
|
#2
|
|||
|
|||
As shocking as it might seem, there wasn't a service manual available until recently; Although, the owners manual was sometimes referred to as the service manual by the factory. Look on corporate website for the manual for the '06 or '07 and it should be quite helpful.
jeff |
#3
|
|||
|
|||
serv manual
Quote:
Before I saw the downloads, I sent away for a CD that has the whole factory service manual loaded on it for $20. There are two sites from Europe that have them and you can pay the $20 and download it to your computer to burn yourself, but I felt safer having them do it. I haven't seen the CD yet. It's in Ga and I'm in TX.
__________________
05 GG MC250- street titled 95 Honda CR500- ported with bigger carb 81 Yam XS650- restored from rusted yard ornament - - - - - - - - - - "Old" bikes> 06 KTM 300XCW- returned-dealer scam- 1st owner seized & returned prior to sale to me as "new" 87 Yam YZ490 81 Yam IT250 84 Honda v45 Magna 74 Suzuki TS400 76 CZ motocross 250-bought new in 81-should have kept 74 Kawasaki G5100 |
#4
|
||||
|
||||
I will try to provide direct links, but not sure if it will work properly.
Here is the 2006 Workshop manual: http://www.gasgasmotos.es/rcs/enduro...taller_eng.zip If that link fails or you need more manuals... Go to the main site --> http://www.gasgasmotos.es Click on "English". Click on "Enduro". Click on bike year (far right side). Scroll down to bottom of page and download the desired manual. Note: it appears they only have manuals for 2004 to 2007 bikes. -------------------------------------------------------- For earlier model years, you can try GasGas Atlantic: http://www.gasgasatlantic.com/tech.htm Scroll down and you will find manuals for 2003 to 2006 bikes. It looks like the 2006 workshop manual is also available here. ---------------------------------------------------------- By the way, I have the 2001/2002 owner manual (pdf format: 2.2MB) and the 2001 parts manual (pdf format: 10.7MB). They are too large to email, but I can ftp them to Jeff if he is willing to host them on this site.
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 |
#5
|
||||
|
||||
The CD you are getting might be what I am looking for. Let me know if it is more than just an owners manuel, which is all the downloads are. I was able to download a shop repair manuel for my CRF450 and thought I might be able to do the same thing for the Gas Gas.
I have downloaded the manuel that is available for some models and that is helpful but I need to know the float setting for my carburetor. I am sure I will need engine data later so I would like to have a full shop manuel. |
#6
|
||||
|
||||
I found what I was looking for, thanks.
|
#7
|
|||
|
|||
|
#8
|
||||
|
||||
I'm digging up a old thread here...
I thought these 2001/2002 manuals would be useful for some folks. These are hard to find since typically 2003-2008 manuals are only available. Here are links the 2001/2002 manuals. You will need to unzip the files from the first link. http://212.166.128.102/gasgas/2001/ec2001_parts.zip http://212.166.128.102/gasgas/2002/gg_ec_man.pdf
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 |
#9
|
|||
|
|||
|
#10
|
||||
|
||||
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2001 EC250 exhaust | leejames | Enduro Engine - 2 stroke | 6 | 11-27-2009 03:04 PM |
Looking at a 2001 EC250 | sahzooki | General Discussions & Announcements | 2 | 06-12-2009 10:47 PM |
manuel | steve | General Discussions & Announcements | 4 | 03-27-2008 08:10 PM |
Dual Map on a 2001 EC250 | ducncover | Enduro Electrical & Wiring | 4 | 03-03-2008 03:42 AM |
2001 EC250 Jetting | ducncover | Enduro Intake/Carburetion - 2 stroke | 6 | 01-07-2008 04:22 PM |