Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-14-2021, 05:15 PM
'18 Novvy '18 Novvy is offline
Member
 
Join Date: Aug 2020
Posts: 2
Thumbs down '18 EC300 Airbox Cover Falling off

The 2018 EC300 airbox is held on by metal lugs which go through a rubber grommet. This is neat because I can pull it off without tools.

However this is terrible because it falls off by itself when revs get high i.e. EVERY RIDE.

How have people secured this?


Reply With Quote


  #2  
Old 12-15-2021, 12:49 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

Quote:
Originally Posted by '18 Novvy View Post
The 2018 EC300 airbox is held on by metal lugs which go through a rubber grommet. This is neat because I can pull it off without tools.

However this is terrible because it falls off by itself when revs get high i.e. EVERY RIDE.

How have people secured this?
I think it was an update on this on the '19 models? Perhaps you could fit some parts from 19?

Disclaimer:
I don't own either of these bikes, I just take this from memory.
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #3  
Old 12-15-2021, 12:54 AM
farmerj's Avatar
farmerj farmerj is offline
Platinum Level Site Supporter
 
Join Date: Dec 2007
Location: Salem, OR
Posts: 361
Default

Check post #20 in the ?2018 tech tips? sticky. It refers to adding some KTM grommets & has some explanation.

Jeff
__________________
'18 GG XC 300
'05 GG DE 300
'01 GG txt 321
Reply With Quote
  #4  
Old 12-15-2021, 08:15 PM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 579
Default kit

Theres an upgrade kit from rieju . got one from AZ moto
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
The airbox on EC300 2013 is terrible Larsa Enduro Intake/Carburetion - 2 stroke 9 08-11-2015 05:42 PM
Removing '05 airbox cover Trooper Sam Enduro Chassis & Body 7 01-23-2012 11:19 AM
New 2010 EC300 Engine Noise (falling revs) Jakobi Enduro Engine - 2 stroke 11 11-16-2010 06:41 PM
airbox washing cover? roostafish General Discussions & Announcements 3 01-19-2010 01:10 AM




All times are GMT -5. The time now is 03:35 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org