Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-21-2018, 02:03 PM
Jacob 'Berg Jacob 'Berg is offline
Senior Member
 
Join Date: Mar 2014
Location: Scottsdale, AZ
Posts: 589
Default 2018 XC 250 Base Gasket

Anyone know stock base gasket thickness for the 2018 XC 250? I will find out in another 30 hours or so when I do a top end. I just do not want to pull the jug until it is time for that job...


Reply With Quote


  #2  
Old 08-21-2018, 02:16 PM
Gottsell Gottsell is offline
Member
 
Join Date: Jan 2018
Posts: 28
Default

Woundering the same.
And what piston height is recomended, cant find any info about that .
Reply With Quote
  #3  
Old 08-22-2018, 01:34 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Eyeball it..

If its the metal coated one (black on each side) they are usually 0.5mm

Green is 0.3mm.

From memory..

My old 2010 had 1.3mm of gaskets packed between the cases and jugs stock!
Reply With Quote
  #4  
Old 08-22-2018, 06:01 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

All the 2018?s I?ve seen/heard of 250/300 have had 0.5mm like Jake said.
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #5  
Old 08-22-2018, 03:01 PM
Jacob 'Berg Jacob 'Berg is offline
Senior Member
 
Join Date: Mar 2014
Location: Scottsdale, AZ
Posts: 589
Default

Thank you kindly gents!
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
wet base gasket thejackrabbit Enduro Engine - 2 stroke 6 02-09-2014 01:03 PM
Base Gasket re-use? motogroove Enduro Engine - 2 stroke 5 06-26-2011 07:56 PM
!!! Help with Base gasket thickness !!! timlh Enduro Engine - 2 stroke 1 05-14-2009 07:58 PM
Base gasket Ud_luz Enduro Engine - 2 stroke 21 05-09-2008 07:38 AM
Base Gasket gtsnowcrack Enduro Engine - 2 stroke 6 09-09-2006 05:43 AM




All times are GMT -5. The time now is 03:01 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org