Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body
Reload this Page rear axle Q
Register FAQ Calendar

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 06-07-2012, 12:02 PM
nokturnal nokturnal is offline
Member
  
Join Date: Mar 2012
Location: Ontario, Canada
Posts: 52
Lightbulb rear axle Q
are there any rear axles that will fit my 06 EC250 that DO NOT have the "pin"?

I would like to have some spacers made up so I can use my STS stand, but I require an axle i can put a pin through from one side to the other.

TIA


__________________
06 EC300
Reply With Quote


  #2  
Old 06-13-2012, 02:51 PM
nokturnal nokturnal is offline
Member
  
Join Date: Mar 2012
Location: Ontario, Canada
Posts: 52
Default
no?

ok how about this... does anyone have a rear axle on there bike that does not have that little locating pin to keep it from turning when tightened?
__________________
06 EC300
Reply With Quote
  #3  
Old 06-13-2012, 03:08 PM
bowhunter007's Avatar
bowhunter007 bowhunter007 is offline
Senior Member
  
Join Date: Mar 2012
Location: Tacoma, Washington
Posts: 976
Default
Quote:
Originally Posted by nokturnal View Post
no?

ok how about this... does anyone have a rear axle on there bike that does not have that little locating pin to keep it from turning when tightened?
On a '01 EC250, I used a rear axle from a '95 KX250(no pin). Hold the non-drive side w/adjustable wrench, and tighten away.
__________________
All healed up, and ready to burn some fat.
Reply With Quote
  #4  
Old 06-13-2012, 03:12 PM
bowhunter007's Avatar
bowhunter007 bowhunter007 is offline
Senior Member
  
Join Date: Mar 2012
Location: Tacoma, Washington
Posts: 976
Default
Quote:
Originally Posted by nokturnal View Post
are there any rear axles that will fit my 06 EC250 that DO NOT have the "pin"?

I would like to have some spacers made up so I can use my STS stand, but I require an axle i can put a pin through from one side to the other.

TIA
Sorry, didn't answer this Q. Yes, the kx axle is hollow all the way through.
__________________
All healed up, and ready to burn some fat.
Reply With Quote
  #5  
Old 06-13-2012, 10:52 PM
nokturnal nokturnal is offline
Member
  
Join Date: Mar 2012
Location: Ontario, Canada
Posts: 52
Default
cool thanks. 1993-2002 KX 125 and 250 use the same axle.

does anyone know if the 01 and 06 EC have the same rear axle specs?
__________________
06 EC300
Reply With Quote
Reply



« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
txt 250 1999 rear axle Rabbitist General Discussions & Announcements 0 03-15-2012 03:27 PM
rear axle nut wrench for a tool bag? jostby General Discussions & Announcements 11 06-03-2010 09:58 AM
450 wild rear axle bearings dogsbody Other GasGas Bikes/Quads 1 07-16-2009 10:03 AM
Extended Rear Axle -450 Wild HP Beardy Other GasGas Bikes/Quads 3 07-01-2009 07:43 PM
rear axle nut skid jackson Enduro Chassis & Body 2 06-17-2007 06:52 PM




All times are GMT -5. The time now is 07:18 AM.

Contact Us - GasGasRider.org - Top

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org