GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 06-29-2008, 08:53 PM
Trailrider Trailrider is offline
Senior Member
 
Join Date: Oct 2006
Posts: 158
Default RoxSpeed bar risers

Has anyone used the forward bar mounts from these guys? I've been looking for some forward mounts for my '01 XC300. I have a BRP top triple clamp and it's not much further forward than stock. I don't use a steering stabilizer so I don't need that kind. I don't know much about the newer models but my '98 EC250 has the best setup, two mounting bolts instead of one and reversible for a good forward mount, added a spacer underneath and it's perfect.
Trailrider


Reply With Quote


  #2  
Old 07-01-2008, 06:37 PM
skid jackson skid jackson is offline
Senior Member
 
Join Date: Jul 2006
Location: NH, USA
Posts: 1,057
Default

hmm post a link to which ones you are talking about ..
I have some rox bar risers that came off my ski doo sled that i'm going to be getting rid of. worked well on the sled, never seen any on a bike. can't remember if mine are 1" or 2" risers tho.
Reply With Quote
  #3  
Old 07-01-2008, 06:52 PM
Trailrider Trailrider is offline
Senior Member
 
Join Date: Oct 2006
Posts: 158
Default Roxspeed bar risers

The bars mounts are on the dualsport page at Roxspeedfx.com. They aren't specifically for GasGas and I don't think they are the design used on the snowmobile. They look more like regular offset bar risers, just wondered if anyone has tried them and if they fit. They are the ones they call "block" risers.
Regards,
Jim
Reply With Quote
  #4  
Old 07-23-2008, 01:40 PM
Trailrider Trailrider is offline
Senior Member
 
Join Date: Oct 2006
Posts: 158
Default RoxSpeed bar risers

I went ahead and bought the 'block' Speed Risers, they work great on my BRP top triple clamp. 1 1/2 inches taller and bars are moved about 3/4 of an inch forward. This is on a 2001 XC300 with WP forks. I don't know much about the newer models but mine now have the bars in the position they should have been in the first place.
Trailrider
Reply With Quote
  #5  
Old 08-05-2008, 06:02 AM
stay_upright's Avatar
stay_upright stay_upright is offline
Senior Member
 
Join Date: Jan 2008
Location: Coventry UK
Posts: 460
Default

So you ended up with something a bit similar to this then http://www.gasgasrider.org/gallery//...puser=946&sl=s
__________________
'05 Gas Gas 300
'97 Aprilia Pegaso 650
'99 KTM 200
'95 ish XR630 (died many times in Oz)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Scotts tower and bar risers d2w Enduro Chassis & Body 8 07-25-2007 10:30 PM




All times are GMT -5. The time now is 01:42 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org