Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-20-2011, 04:51 AM
bitoman bitoman is offline
Member
 
Join Date: May 2009
Location: Honolulu
Posts: 13
Default Clutch hub nut GASGAS ME25632028,Honda 90235-ka4-000

FYI GASGAS #ME25632028 clutch hub nut is 18mm x 1.0 thread pitch.A Honda nut #90235-ka4-000 will fit.The only difference is 30mm socket to remove GASGAS.27mm for the Honda.Nut is from alot of cr250's and 125's.If your in a pinch,these are easier and cheaper to get...


Reply With Quote


  #2  
Old 11-15-2019, 02:20 PM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

Bringing back the dead, but also showing my appreciation!!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Honda XR's roostafish All Other Bikes... 8 04-13-2011 04:07 PM
Has anyone tried to put forks from a honda on a Gas Gas mikemoto General Discussions & Announcements 9 12-20-2010 07:54 AM
Honda Clutch on2wheels4ever Enduro Engine - 2 stroke 1 09-01-2010 06:55 PM
honda 84 canister peterr All Other Bikes... 1 02-27-2007 02:49 AM




All times are GMT -5. The time now is 09:43 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org