Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-06-2019, 11:17 AM
Nicktamps Nicktamps is offline
Member
 
Join Date: Nov 2019
Posts: 52
Default kickstart Shaft

Hi all. Fitted a new Kickstart shaft today as it had snapped , everything working fine with the cover off but when i put the cover back on the kickstart has gone pretty tight and doesnt spring return. after taking the cover back off to have a look i can see witness marks on the lip on the shaft. Has anyone had this issue?

Bike is a 2015 EC 250. im probably just going to see if it beds in. but if anyone has any other advice i would be greatful

Quite new to the forum. only had the bike a few weeks. Thanks for any help

Nick


Reply With Quote


  #2  
Old 12-06-2019, 04:17 PM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

There is a notch in the plastic internal guide for the spring you probably have not got it lined up. It does not need to bed in, it should snap back to position if it is assembled correctly.
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #3  
Old 12-09-2019, 11:49 AM
Nicktamps Nicktamps is offline
Member
 
Join Date: Nov 2019
Posts: 52
Default

Quote:
Originally Posted by Gasser Nate View Post
There is a notch in the plastic internal guide for the spring you probably have not got it lined up. It does not need to bed in, it should snap back to position if it is assembled correctly.
It snaps back to position without the case on. And when the case is put on it goes stiff. There are witness marks on the shaft where it goes from a smaller diameter to a larger diameter where its rubbing on the casing. It's got looser already after 1 ride mind
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2015 Ec250 kickstart shaft In U.K Nicktamps "Wanted to Buy" & "Want To Trade" 2 12-02-2019 03:02 AM
Kickstart Shaft Seal Replacement EC300 risk74 Enduro Engine - 2 stroke 2 03-21-2017 06:52 AM
Yz kickstart Diggs345 "Wanted to Buy" & "Want To Trade" 14 12-04-2016 09:22 PM
WTB kickstart uk motopsycho87 "Wanted to Buy" & "Want To Trade" 5 01-12-2015 01:43 PM
Kickstart shaft question GMP Enduro Engine - 2 stroke 6 02-22-2009 02:55 PM




All times are GMT -5. The time now is 04:47 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org