|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Spring dimensions KYB 18/19
Can anyone confirm the correct spring dimensions for the 18/19 KYB suspension?
__________________
2018 EC 300 |
#2
|
|||
|
|||
Quote:
There are 12 different springs available for the Gasgas 300 EC 18/19. If you ask for dimensions what do you exactly mean. Wire thickness, diameters. lengths? I can give you the above mentioned dimensions for every KYB spring available. I need toknow which springs you run (N/mm). Or, if you PM me your e-mail I can send you the KYB parts catalogue 2019 and you can look at all the dimensions there. Or maybe this can help: https://www.teknikmotorsport.com/com...as/ec300/2018/ The standard springs are front: 4.2N/mm rear: 52N/mm (source: 2019 EC 300 owners manual ) |
#3
|
||||
|
||||
I?ve got a stick spring at home I can measure too. I used a spring from a WR450 in mine. Same dimensions except for the length, it was 10mm shorter, but easily taken up by the preload collars.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#4
|
||||
|
||||
In case anyone is searching for this info., I just measured mine at 43mm x 454 mm.
I had called Cannon Racecraft and their book said 470mm long (that's not right). I believe these GG springs are the same dimensions as the YZ 250. FYI, Jeff BTW, Doc mentioned spring rates above. If you're a bit new to suspension like me, recognize that there are two units of measurement used - and a conversion calculation needs to be done. For instance, the GG Manual states 4.2N/mm front, 52N/mm rear as Doc correctly indicates. But that is NOT Kg/mm, which is another common measurement. I purchase a 5.4Kg shock spring, but the stock 52N/mm = 5.3Kg/mm. So I didn't really increase the spring rate by much. Lesson learned!
__________________
'18 GG XC 300 '05 GG DE 300 '01 GG txt 321 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EC125 springs dimensions | doutsh | Enduro Suspension | 0 | 06-11-2015 06:29 AM |
Footpeg Dimensions | Neil E. | Enduro Chassis & Body | 16 | 10-15-2014 08:56 PM |
JD needle dimensions | BryanMcc | Enduro Intake/Carburetion - 2 stroke | 6 | 03-07-2013 07:10 PM |
Hebo fatbar dimensions? | Leon_gasgas | Enduro Chassis & Body | 5 | 11-25-2008 06:01 PM |
'07 radiator dimensions | GMP | General Discussions & Announcements | 6 | 03-26-2007 09:48 AM |