Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-01-2020, 05:32 AM
masterbill masterbill is offline
Member
 
Join Date: Mar 2016
Posts: 79
Default float level







Setting fuel level.

Well the carb has always been a pain, sometimes it leaked sometimes it was
fine. Put in a new valve ,polished the seat etc.

Anyway seeing as I got time on my hands I thought I'd try this.

Set the bike upright using an app on the phone, got a small bit of wood and measured the inlet angle. Angle is 21 deg there about.

Set the adjustable angle plate level in the vice and then angle to 21 deg.

Although you can't see it very well fuel level is level with float body / float bowl line.

Doesn't drip at this setting.

Measured the side stand angle at 17 deg, set the carb at 17 deg and after a while it drips !!!

Will readjust and see what happens


Reply With Quote


Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another Float Level Question Bean Enduro Intake/Carburetion - 2 stroke 9 02-21-2020 01:49 PM
ASII Float Level With Pix andoman Enduro Intake/Carburetion - 2 stroke 30 12-29-2019 12:10 PM
float level 05 ec200 paulos Enduro Intake/Carburetion - 2 stroke 3 02-18-2014 05:47 PM
float level drn51 Enduro Intake/Carburetion - 2 stroke 5 01-12-2013 12:15 AM
Float Level, please explain? rod Enduro Intake/Carburetion - 2 stroke 13 02-12-2011 01:03 PM




All times are GMT -5. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org