|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2011 Ec250 levers
Looking to buy a brake lever and a clutch lever. Im having a hard time finding what I need. Does anyone know what levers from other brakes will fit. I searched cross over parts in the forum and not having any luck. Thanks.
|
#2
|
||||
|
||||
The brake lever is a Honda CR. The clutch lever has no cross over but I run a GG trials lever. It's a shorty. The Honda lever is available in a shorty as well.
__________________
2018 EC 300 |
#3
|
||||
|
||||
As for clutch lever. I am a huge fan of these from Midwest Mountain Engineering.
http://midwestme.com/index.html I have a 2012 300 and have the Magura 2 Clutch Lever installed.....One of the best clutch lever I have ever used!!! http://midwestme.com/pages/productspage.html
__________________
2012 - XC 300 Racing Seattle, WA |
#4
|
|||
|
|||
Thanks for the info. Just what I was looking for. I really like the clutch levers from Midwest mountain engineering. Im 95% sure that I have the magura 2 clutch lever on my 2011. I have looked at the pictures they have but Im just not 100% sure. Does anyone no for sure what the 2011's have. Thanks
|
#5
|
||||
|
||||
I thought the 11's still had AJP clutch masters?
Its easy enough to check, it will either say AJP or Magura on the cap. Also, you can mount up a Magura clutch master easily enough, which makes getting spares for it much easier. Moose make aftermarket levers for the AJP master, I think they come through partsunlimited. I don't live in the states, so can't confirm, but I had read that one of the main aftermarket company does make cheap levers for gasgas'. |
#6
|
||||
|
||||
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#7
|
||||
|
||||
My 2011 has the AJP master.
__________________
2018 EC 300 |
#8
|
|||
|
|||
My 2011 EC250 Race is marked "AJP" but only on the choke lever.
The only other significant marking is "Mineral Oil." I'd like to use the Midwest Mountain Engineering Clever Lever, but not if I have to replace the AJP. |
#9
|
||||
|
||||
Its either AJP or Magura, should be easy to tell, AJP is like your '05. Scrap that cable choke.
The Magura on the '12 comes with a nice folding lever. |
#10
|
|||
|
|||
It looks like AJP to me. We kind of like the choke lever for bombing down long sand washes. I'll take it off it it becomes a problem. I already have a spare, if I can find it.
I've just completed exchanging e-mails with the owner. He said Magura and Brembo only. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2011 EC250 to 300??? | skraMnoR | Enduro Engine - 2 stroke | 28 | 01-15-2013 08:11 PM |
2011 EC250 graphics fit 2011 EC300? | Jarvo_325 | Enduro Chassis & Body | 2 | 11-25-2012 06:28 PM |
2011 EC250 top end | redrider | Enduro Engine - 2 stroke | 7 | 11-27-2011 11:02 AM |
shorty levers for 03 ec250 | dank | Enduro Product Reviews | 3 | 02-21-2010 05:22 PM |