|
Enduro Product Reviews Feedback & Comments on Products Tested |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Fisher seat modification review
Initial impression "wow"
Mr. Fisher is very involved in the product, calling my multiple times and making the effort to look my bike up on the internet even though I sent him a picture. I gave him creative license in near every regard, but speaking with him I did choose his midline gripper texture for the top, low line for the sides, and conventional on the bottom. The seams are perfect, I cannot stretch or pull them. The vinyl is I would approximate twice as thick as original, which is VERY thin, he did send the old cover back. I chose to have him build an entire cover due to tears in mine, I had recently just put a small cut in the top gripper section by merely missing a bit getting a leg over the bike with my boot. I can't speak for older models, but the my 2011 had long splits on the seat cover at the knees, figured wear, but Fisher told me there was very sharp flashing at the seat base at that location, and I can see with the cover removed that it also was split at the rear in front of the intake ports, and some bad witness marks up along the centers where it certainly would have split in the future. Naturally he filed and rounded these before installing the new cover. I will offer a long term report as I put some hours on it, currently riding around the yard works very well, no hinderance, I can feel the wings a bit at extreme movement, but otherwise nothing. I actually feel I have a better grip across the knees with this seat as there is just flat more to grab. I don't beleive there will be any issue, but after review I will suggest to Fisher to add a double thickness at the seat bolt, or perhaps some rubber part like he makes his badge out of to provide a more durable pinch. I would also widen the front packet perhaps 1 inch on each side, he did an excellent job matching the angles but I don't think an extra inch up to the bill of the seat would hurt at all, and may help? |
#2
|
|||
|
|||
And some additional pics
|
#3
|
||||
|
||||
Not a fan of how they look but has to be comfy for sure! Great to hear the workmanship in spot on and that the customer service meets the product too! I can attest to what he said about the seat frame being sharp particularly where the knees grab. Mine managed to cut through the seat cover both sides. In true Gas Gas form the cover was replaced under warranty though. I've not installed it yet. Have considered sewing some reenforcing to that area on my torn one or having a shop use it to fab something stronger up.
|
#4
|
|||
|
|||
Long ride review, night and day difference. No monkey butt, no pain, no sitting side saddle half way through the day. I can honestly say I can find no downside to this seat alteration. I will say if you are under six feet or stuck on reaching the ground, do not add the inch of foam as you just won't have the inseam to feel comfortable. The added inch does however really seem to make a difference on a long ride for the transitions up/down to your quads.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fisher Saddlebags Seat Mod | rxmx | Enduro Product Reviews | 3 | 06-24-2012 09:14 PM |
subframe kit or modification | peanutsracing1 | Enduro Chassis & Body | 11 | 02-20-2011 01:18 PM |
skid plate modification? | stainlesscycle | Enduro Chassis & Body | 4 | 11-02-2010 10:39 PM |
Modification/Aftermarket Database | SpeedyManiac | Enduro Product Reviews | 4 | 02-04-2009 07:09 AM |
Product Review: Guts Tall Soft Seat Foam | SpeedyManiac | Enduro Product Reviews | 6 | 04-03-2008 11:11 AM |