|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
Yes. In my experience, at 2 to 2 1/2 turns out and a larger pilot - it works better. Then you can turn down idle (back it out) to improve separation of carb circuits.... The air screw will then have more effect - e.g. you will be able to fine tune - like a quarter turn will make a difference, etc.
If you are worried about losing idle screw - you could put a very small dab of low strength loctite on it's threads. Let it dry completely prior to installing. jeff
__________________
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Running rich EC300 | swegass | Enduro Engine - 2 stroke | 15 | 08-19-2017 08:00 PM |
Am I rich or lean? | pscook | Enduro Intake/Carburetion - 2 stroke | 6 | 08-01-2012 10:17 PM |
Rich or Lean | dickieshep | Enduro Intake/Carburetion - 2 stroke | 10 | 07-21-2011 01:33 AM |
Running rich | Evans P | Enduro Intake/Carburetion - 2 stroke | 2 | 02-26-2010 12:50 PM |
2005 EC300 vs 2007 EC300 | alecsstefan | Enduro Engine - 2 stroke | 19 | 01-22-2010 01:40 AM |