First ride on my set up 2011 XC 300E

[REVERUP]

That is the stock 36mm. My first 36mm as all my other Gas Gas 300's had the 38mm. From what I have been told it is the same as the KTM's.

The YZ needle cleaned it up nicely and is still currently in the carb. Try it I think you will approve.

Roscoe

[MrBlah]

Originally Posted by REVERUP

That is the stock 36mm. My first 36mm as all my other Gas Gas 300's had the 38mm. From what I have been told it is the same as the KTM's.

The YZ needle cleaned it up nicely and is still currently in the carb. Try it I think you will approve.

Roscoe

I have one on order, I'm using a CCK @3 right now, with a 40 pilot and 180 main, riding in mostly sand @ 200'

I think mine came with a #7 slide, not really sure

[MrBlah]

I just went from a CCK #4 to the EJ #3 middle, the power is crisp but it's missing some roll on power, makes it harder for me to wheelie in 2nd & 3rd, it may be wheel spinning too easy, it's hard for me to tell, I did not get to ride too long, son broke down