Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 06-14-2010, 02:05 PM
rockrider1's Avatar
rockrider1 rockrider1 is offline
Member
 
Join Date: May 2010
Location: York,PA
Posts: 41
Default front and rear sprocket '07 ec 300

I'm in the need for a front and rear sprocket for my '07 ec 300,is there any cross overs or do i need to buy oem ???


Reply With Quote


  #2  
Old 06-14-2010, 02:17 PM
roostafish's Avatar
roostafish roostafish is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Eugene Oregon
Posts: 1,245
Default

The rears are easy. Ironman, Supersprox, and Moose all have them. The Moose is the least expensive at about $50, it's aluminum and seems high quality enough. The Supersprox is about $80, the Ironman $130. (all retail pricing)

The front I have not found a crossover for, but I know that Talon and Renthal are both available, only through the dealer. I can look up the part number on the renthal package I saved at home and post the part number, but I don't know that you'll be able to get it directly because they don't list it on their site. Fortunately the front sprocket is fairly low price, even at dealer cost, though it is double what you'd think.
__________________
Mike Sheetz
OMRA #21AA
What will I be riding next? Christini GG 300?
'15 KTM 300 XC-W
'08 EC 250 (Gone to new happy owner)
Gran Prix Cycle
LTR Suspension
RB-Designs
Reply With Quote
  #3  
Old 06-14-2010, 02:27 PM
rockrider1's Avatar
rockrider1 rockrider1 is offline
Member
 
Join Date: May 2010
Location: York,PA
Posts: 41
Default

thanks roostafish.....any help would be appreciated. when you say dealer,do you mean gasgas dealer or any bike shop???
Reply With Quote
  #4  
Old 06-14-2010, 02:29 PM
rockrider1's Avatar
rockrider1 rockrider1 is offline
Member
 
Join Date: May 2010
Location: York,PA
Posts: 41
Default

also looking for a throttle cable too.
Reply With Quote
  #5  
Old 06-14-2010, 03:32 PM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default

Ironman does have a front sprocket...12,13,14 teeth.

http://www.dirttricks.com/ordering_sprockets.htm
__________________
2006 Gas Gas EC250
2011 Husaberg FE390
Reply With Quote
  #6  
Old 06-14-2010, 04:56 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default

AFAM make nice sprockets as well get them here!

Give them a call, GasGas is not listed, however the rear pattern is a Husky crossover.

http://www.sprocketcenter.com/
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
  #7  
Old 06-14-2010, 06:48 PM
dank's Avatar
dank dank is offline
Senior Member
 
Join Date: Nov 2009
Location: Pelican rapids, MN
Posts: 568
Default

call gofasters for the throttle cable, and get the +1.5 inch one. there arnt any cross overs because we have a special bend that comes off the carb to accommodate the gas tank, whereas a ktm or honda do not. at least thats the only reason i can think of, the ktm uses the same throttle tube and carb, but the top of the carb is different on ours.
__________________
03 ec250
hyde skidplate, cycra handguads, protaper contours
"what? it seemed like a good idea at the time!"
Reply With Quote
  #8  
Old 06-14-2010, 07:22 PM
wence's Avatar
wence wence is offline
Bronze Level Site Supporter
 
Join Date: Nov 2008
Location: Adelaide South Australia
Posts: 1,159
Default

I just bought a set of front and rear sprockets from Scotties. Supersprox part numbers are:
Rear: 1512(11s-415-47r is also on the package)
Front: 10-GG1-13(95-GG113 also on package)
This was for a 47 tooth rear and 13 tooth front.
I also bought a DID 520 VM chain too.
Hope this helps mate.
Cheers Mark
Reply With Quote
  #9  
Old 06-14-2010, 07:54 PM
roostafish's Avatar
roostafish roostafish is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Eugene Oregon
Posts: 1,245
Default

When I say dealer, I meant Gas Gas dealer, which I understand are fairly scarce. I'm lucky to have the best dealer of any bike brand just 40 miles away, who happens to carry Gas Gas. He's truly the reason I'm still riding a Gas Gas. Gran Prix Cycle is the name of the shop, in Oregon. He even has stuff on the shelf, no waiting for orders. (541) 926-3139

Renthal front sprocket part number:
360A-520-13P

Pretty simple. It even says Gas Gas on the label.
__________________
Mike Sheetz
OMRA #21AA
What will I be riding next? Christini GG 300?
'15 KTM 300 XC-W
'08 EC 250 (Gone to new happy owner)
Gran Prix Cycle
LTR Suspension
RB-Designs
Reply With Quote
  #10  
Old 06-14-2010, 08:18 PM
HuskyDude's Avatar
HuskyDude HuskyDude is offline
Super Moderator
 
Join Date: Jan 2010
Location: Kamloops BC
Posts: 715
Default

Quote:
Originally Posted by roostafish View Post
I'm lucky to have the best dealer of any bike brand just 40 miles away, who happens to carry Gas Gas.
And here I always thought I had the best dealer around. I might have to call ya on that one....
__________________
HuskyDude
10 EC300XC
08 TE510
07 TXT 280
77 TY175
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Front sprocket? wence Enduro Chassis & Body 8 09-18-2010 02:12 AM
14 tooth front sprocket sierrarider General Discussions & Announcements 11 02-12-2009 09:43 AM
FSE 450 W/ 14t Front sprocket??? cal_tony Enduro Chassis & Body 5 12-09-2008 09:47 AM
Front sprocket cross over Silver General Discussions & Announcements 3 09-03-2008 08:53 PM
14 t front sprocket on 300 EC 2007 Blatchy Enduro Engine - 2 stroke 0 11-01-2007 04:30 PM




All times are GMT -5. The time now is 04:07 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org