Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-30-2008, 10:20 AM
super_rat super_rat is offline
Member
 
Join Date: May 2008
Location: Oklahoma
Posts: 54
Default 2007 EC 300 Speedo

Does the factory GG speedo for a 2007 EC 300 run on AC or DC? Does it use a battery? (referring to a battery in the speedo, not a bike battery)

Thanks
Reply With Quote
  #2  
Old 05-30-2008, 10:32 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

Is that the TrialTech version? If so, it runs on AC or DC and has an internal CR2032 battery as well.
__________________
2004 GasGas DE250
Reply With Quote
  #3  
Old 06-01-2008, 01:33 PM
super_rat super_rat is offline
Member
 
Join Date: May 2008
Location: Oklahoma
Posts: 54
Default Speedo pics

I don't know who makes it. Here are pics of front and back. A label with "BE250634005" is on the back. "Made in Taiwan", "10R-022812" and E13 are cast into the plastic on the back.





If this is the Trialtech speedo, where does the battery go?

Any ideas where to find a manual?
Reply With Quote
  #4  
Old 06-01-2008, 01:48 PM
super_rat super_rat is offline
Member
 
Join Date: May 2008
Location: Oklahoma
Posts: 54
Default Speed manufacturer

Found it. Googling 10R-022812 took me here. http://www.acewell-meter.com/images/V1manual.pdf

Manual is at: http://www.acewell-meter.com/images/V1manual.pdf

It's an Acewell ACE 39xx computer

Seems to run on 12VDC.

Anybody have a document that describes the inputs? Nothing in the "manual".

Last edited by super_rat; 06-01-2008 at 07:54 PM.
Reply With Quote
  #5  
Old 06-02-2008, 01:03 AM
armyoforange's Avatar
armyoforange armyoforange is offline
Member
 
Join Date: Jan 2008
Location: penticton b.c
Posts: 19
Default

the red&white wire is for power i have mine hoocked up to a 9 volt battery i had it hoocked up to the ignition but it surged like your headlight does i have the 30 watt ignition or 2k2 i think the green and black wire is for your speedometer you should have gotten a 4or 5 foot leed that threades into your front brake caliper bottom and a pickup attatched to your hub the yellow wire is for your tack it ataches to the coil where the spark plug wire boot comes out of cant remember whitch one once i got every thing else runing i just touched the wire to the diferent conections until it worker sorrey for the bad spelling done didnt finish high school hope this helps ihad to do the same with my bike figure it out
__________________
James 00 ktm exc 300
07 ec 300
Reply With Quote
  #6  
Old 06-06-2008, 10:47 AM
super_rat super_rat is offline
Member
 
Join Date: May 2008
Location: Oklahoma
Posts: 54
Default Speedo schematic

Victory!! I got a PDF file from ACEWELL that shows the connections for the 2007 GG speedo. Let me know if anyone needs it.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
EC300 2007 speedo darren Enduro Electrical & Wiring 3 07-15-2010 12:28 PM
ec 250 speedo help gregtenerife Enduro Electrical & Wiring 3 06-17-2010 01:06 PM
Harvest Classic 2007 European & Vintage Motorcycle Rally October 19 & 20, 2007 sanderjavant Republic of Texas 1 09-26-2007 05:18 PM
EC 300 speedo ?? oldgoat Enduro Electrical & Wiring 7 08-11-2007 03:29 AM




All times are GMT -5. The time now is 08:49 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org