|
|
|||||||
| Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
 |
|
|
Thread Tools | Display Modes |
|
#1
04-05-2014, 04:24 PM
|
||||
|
||||
clutch plates
I have a 98 ec250 and the clutch plates are fried!!
does anyone know if their are any part crossovers? or whether plates from a newer gasser will fit,as I see plenty of kits for 00 onwards thanks Last edited by gasgasman; 04-06-2014 at 01:50 PM. 
|
|
#2
04-24-2014, 02:24 AM
|
||||
|
||||
Yes, they will fit. Other than the 125, all engine sizes share the same clutch drive plates and friction disks.
I like OEM and the Moose kits made for them by Dunlopad (I believe) the best. I think they also supplied the OEM GG parts after 2005 or so. At least they started looking the same about that time. The friction disks look identical to a CR250R, but the CR friction disk is 3mm thick, where the GasGas disks are 2.7mm thick. I did find a crossover with an old Honda CX500 street bike, but didn't like either the Vesrah nor Barnett material's performance. The metal drive plates are unique to GasGas.
__________________
Jim Cook Smackover Racing Team LAGNAF '11 Gas Gas EC250 (primary ride) '06 Gas Gas DE300 2004 Gas Gas TXT300 Pro '94 Husaberg FE350 '86 Yamaha IT200 '86 Honda TRL200 Reflex '04 KTM 525EXC (soon to be dual sported) Several others, including project bikes, Deb's bike, and a fleet of grandkids' bikes Let's go riding! http://www.jebruns.com/Wudi19/wudi19.html http://www.ahrma.org/schedules-results/cross-country/
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Clutch plates worn | speeddemon | Enduro Engine 4 stroke (including EFI & Exhaust) | 6 | 01-28-2012 09:30 AM |
| clutch plates | blanc | Enduro Engine - 2 stroke | 3 | 03-18-2011 05:08 AM |
| steel clutch plates | steve | Enduro Engine - 2 stroke | 3 | 03-15-2011 09:22 PM |
| clutch plates | mxdj2003 | Enduro Engine - 2 stroke | 4 | 11-02-2009 01:37 PM |
| New DP clutch plates won't fit - suggestions? | stay_upright | Enduro Engine - 2 stroke | 6 | 05-26-2008 09:59 AM |
Linear Mode
