Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-11-2009, 01:20 AM
rupecopp rupecopp is offline
Member
 
Join Date: Jul 2007
Posts: 73
Default bugger won't start, any ideas?

I was riding my bike yest (02 gasgas ec200) and I stalled the bike and then couldn't kick start it. I ended up crash starting it. Now it won't start unless it's crash started.

So today I put a new plug in as thought it was just a fouled plug, but it still won't start. It was pretty dusty so I changed the filter for a clean un-oiled one, but still no. So I took the carb off and gave it a good clean everywhere, popped it back on and tipped the bike till fuel came throught the overflow. But still it won't start unless it's crash/bump started.

It's got heaps of compression and isn't lacking any power.?????


Reply With Quote


  #2  
Old 01-11-2009, 02:40 AM
rupecopp rupecopp is offline
Member
 
Join Date: Jul 2007
Posts: 73
Default

ok, just had another look and can't see any spark
Reply With Quote
  #3  
Old 01-11-2009, 05:19 AM
Boomhauer's Avatar
Boomhauer Boomhauer is offline
Senior Member
 
Join Date: Sep 2006
Posts: 920
Default

Make sure the boot is secured to the wire correctly. Make sure all of your wires around the regulator are secured tightly.
Reply With Quote
  #4  
Old 01-11-2009, 07:33 AM
seitz64 seitz64 is offline
Member
 
Join Date: Nov 2008
Posts: 71
Default bugger wont start

had that prqblem a couple times on some ktm!s if it bump starts its probibly the stator good luck
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
any ideas help needed leeroberts Enduro Engine 4 stroke (including EFI & Exhaust) 2 06-09-2010 06:54 PM
Norheast member ride ideas GMP NorthEast United States 32 02-27-2008 04:13 AM
looking for ideas?? tub350 Enduro Intake/Carburetion - 2 stroke 4 08-18-2007 03:09 PM
Taking a machining class: Project Ideas? SpeedyManiac General Discussions & Announcements 4 01-21-2007 05:42 PM




All times are GMT -5. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org