|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Rear wheel axle block seized
I got some after market axle blocks and I can?t get the original axle block off, it is galled to the axle. I?ve soaked in kroil and tried using a torch to heat it up and nothing. Anybody have ideas? Also is the threaded axle block side (opposite from axle nut) reverse threaded ?
|
#2
|
||||
|
||||
Quote:
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#3
|
||||
|
||||
Put some more heat to it and melt some candle wax into it, the shit works wonders
|
#4
|
|||
|
|||
On my bike the axle blocks do not thread into the swingarm, the adjuster nut rests against the swingarm. so it will just be dirt holding it in place, ONCE YOU HAVE CONFIRMED THIS IS THE CASE FOR ALL MODELS you could just tap it out from the wheel side
__________________
2003 txt250 Pro 2013 Ossa 280i |
#5
|
|||
|
|||
I believe he is referring to the block that is attached to the axle itself, on the drive side. Likely hard to remove as the block is aluminum and the axle is steel/stainless. Steel and aluminum threaded attachments tend to gall due to the different material properties.
|
#6
|
|||
|
|||
Quote:
__________________
2003 txt250 Pro 2013 Ossa 280i |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2018 axle block pre-orders | motocenteraz | Enduro Product Announcements | 16 | 02-15-2020 11:50 PM |
wtb 2009 front wheel + spacers+ axle | jt633 | "Wanted to Buy" & "Want To Trade" | 5 | 12-03-2018 03:19 PM |
Seized front axle | sheepy | Enduro Chassis & Body | 7 | 06-08-2018 03:55 AM |
Rear Wheel Axle | singletracker | Enduro Chassis & Body | 38 | 07-24-2013 09:08 PM |
Front Axle/Wheel Removal | gasIdaho | Enduro Chassis & Body | 1 | 02-15-2007 08:31 PM |