![]() |
|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
hey guys, i'm having a problem with my 2003 fse450. It has a really weak spark, and its not starting as a result. I have a brand new gel battery in the bike w/ a bettery tender, and i just replaced the the wire that runs from the coil to the plug, as well as the plug itself. It's not just weak with e-start it's weak with kick start too. Any opinions are appreciated.
I'm wondering if its the coil? But until i'm sure its the coil, i don't want to spend the $100+ on a new one. Thanks again |
#2
|
||||
|
||||
![]()
I'm not the thumper expert but....I would check:
1. Kill switch to make sure it is not causing the problem. Could be grounding some place? 2. Clean all connections with a cleaner and make sure there is no corrosion 3. Look for pinched or broken wire within the wiring system Maybe someone else can help out here....
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#3
|
|||
|
|||
![]()
So today i got it to start. But it ran really rough and had some knocking noises. Would valves needing to be adjusted cause starting problems? B/c i figure thats probably whats causing the knocking.
I can adjust the valves if i had the manual. But GG's website doesn't have the '03 shop manual for download. Anyone know where i can get it? Thanks. |
#4
|
||||
|
||||
![]() Quote:
http://www.gasgasmotos.es/rcs/manual..._fse03_eng.zip See this page for others http://www.gasgasmotos.es/rcs/manuales/endurofse.htm
__________________
2004 GasGas DE250 |
#5
|
|||
|
|||
![]()
So basically i need to take it to a shop. I've never dealt with shims for valves before. Everyone says that drz400 valve shims work. Do you guys think I can take my cylinder head off and bring it to a suzuki shop (I dont have a GG dealer within 3 hours of here) and give them the specs from the manual and have them do it, or should i take it to a proper place?
|
#6
|
|||
|
|||
![]()
Does anybody know for sure if the drz400 valves will workf or the fse450? I've heard from multiple people in difference places that they do.
|
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fix for no spark | brains | Enduro Electrical & Wiring | 2 | 08-14-2010 01:38 AM |
no spark... | stainlesscycle | Enduro Electrical & Wiring | 9 | 02-17-2010 08:06 PM |
Weak turnover w/ new battery | INABIL | Enduro Engine 4 stroke (including EFI & Exhaust) | 13 | 11-18-2009 11:13 PM |
weak regulater mount material? | REVERUP | Enduro Electrical & Wiring | 8 | 10-15-2008 07:49 PM |
weak spark?? | Cruiser | Enduro Engine - 2 stroke | 11 | 07-01-2007 03:26 PM |