Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-07-2009, 09:59 AM
Gasgasogeros Gasgasogeros is offline
Member
 
Join Date: Oct 2009
Location: Halkidiki Greece
Posts: 67
Default what about this jetting?

hi my ec 300 2004 have this setting men jet 175 . needle N1EF . 3 from top
slow jet 35 . slide 7 . end air screw 0.5 turn from full close the bike run good but not perfect
thanks


Reply With Quote


  #2  
Old 12-11-2009, 08:21 AM
Gasgasogeros Gasgasogeros is offline
Member
 
Join Date: Oct 2009
Location: Halkidiki Greece
Posts: 67
Default

hi all i ask for the 35 slow jet i don't now if its the oem i think is too small
any opinion please
regards
Reply With Quote
  #3  
Old 12-11-2009, 08:38 AM
GG27 GG27 is offline
Senior Member
 
Join Date: Feb 2008
Location: Athens Greece
Posts: 118
Default

I would go to at least a #40 pilot and get the air screw out to 1 and 1/2. Where are you located and what are your weather conditions?
__________________
EC250 2008 Skid plate, rad braces, Fork bleeders
Drz 400 Motard '03 (full spec)

Yz 250 '06, KTM exc 250 '05, exc 250 '04, exc 250 '02
WRF250 '02, KDX 220 '98, DT200R '93 all sold
Reply With Quote
  #4  
Old 12-11-2009, 09:28 AM
jhendr3702's Avatar
jhendr3702 jhendr3702 is offline
Silver Level Site Supporter
 
Join Date: Apr 2008
Location: Amarillo TX
Posts: 1,173
Default

when i bought my 01 300 it had a 35 pilot in it also...
les at ltr told me that was oe jetted for leaded gas...
I had never seen a pilot jet that small.
42 in mine...
as gg27 says depending on where you are..
__________________
broken down over 60 slow rider..
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
where to go from here. jetting q. dank Enduro Intake/Carburetion - 2 stroke 105 04-11-2011 05:25 PM
LTR or JD Jetting Kit Elvis74 Enduro Intake/Carburetion - 2 stroke 7 04-08-2010 03:49 PM
Need help jetting an 06 EC 250 piperpilot12w Enduro Intake/Carburetion - 2 stroke 3 11-17-2008 12:19 AM
jetting help for 05 300 please... mackmack Enduro Intake/Carburetion - 2 stroke 5 09-03-2007 06:10 PM
06 300 jetting fury1 Enduro Intake/Carburetion - 2 stroke 1 07-31-2007 07:37 AM




All times are GMT -5. The time now is 09:02 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org