O-Rings for clutch slave 2018/2019 300's - Rieju & GasGas Legacy Riders Club Forum

		Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke
O-Rings for clutch slave 2018/2019 300's

FAQ

Calendar

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools

Display Modes

11-01-2019, 04:39 PM

Doc Brown

Senior Member

Join Date: Dec 2017

Location: Austria, Europe

Posts: 586

O-Rings for clutch slave 2018/2019 300's

When I had clutch problems I replaced the slave cylinder and found that it has a piston with one groove.
The new slave, ordered from GasGas with original GasGas part number has a different piston with two grooves and two o-rings (picture below). I would like to have spare o-rings but it seems they are not available through Gasgas.

Any ideas?

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EC/GP 300 2018/2019 offset	Doc Brown	Enduro Suspension	2	09-03-2019 02:46 PM
2018/2019 12v Power Connector	RudolfHucker	Enduro Electrical & Wiring	4	01-20-2019 02:08 AM
will 2019 map switch fit 2018	Doc Brown	Enduro Electrical & Wiring	13	12-27-2018 08:44 AM
clutch slave	vwboomer	Enduro Engine 4 stroke (including EFI & Exhaust)	1	06-12-2012 04:04 PM
Oil around Clutch Slave	rickster2	Enduro Engine - 2 stroke	5	08-29-2006 11:27 AM

All times are GMT -5. The time now is 01:18 AM.