Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.

Thread Tools Display Modes
Old 11-01-2011, 11:17 AM
desertgasser300 desertgasser300 is offline
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default Simple reminder about idle/carb issues

I couldnt for the longest time figure out why my bike would not idle properly. My jetting felt spot on and still my bike would not idle. RB mods done still no idle. It would idle ok when I adjusted it before take off, then it would only idle intermittently when ever it just felt like it!!! Long story even longer.......

Check all your connections to the carb.....this brass nut was loose on top of the cap. Once I tightend it, all is good with the idle. Sorry the bike is so dirty, ran a hare scramble on sunday.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
simple carb fuel level tool Gasgasogeros Enduro Intake/Carburetion - 2 stroke 19 01-08-2013 01:11 PM
Carb issues - Float bowl? Hicksi Enduro Intake/Carburetion - 2 stroke 7 10-19-2011 11:21 AM
Carb tuning no idle waycrazy Enduro Intake/Carburetion - 2 stroke 8 09-19-2011 11:09 AM
simple tire size question 02 gasgas xc 250 asshat Enduro Chassis & Body 7 05-19-2011 03:14 PM
PWK replacement resolve idle, jetting issues? socalscott Enduro Engine - 2 stroke 2 01-04-2010 12:32 PM

All times are GMT -5. The time now is 08:52 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org