|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Converting my EC144 to e-start
Hello everybody,
I am planing to convert my 2011 EC144 to e-start. For this I need some CAD data. Is someone here who has good contacts to the factory and can try to get the data for me? I need only the left side of the motor with the ignition and maybe the starter motor. It would be a great help for me. Due to the fact that I am a professional cad design engineer, I can give the final data back to Gasgas if they are interested.
__________________
4 strokes are only good for power generators |
#2
|
||||
|
||||
Check these kits out. No GG models. But, you can adapt their setup.
https://www.pantheramotorsports.com/electric-starter You will have to beef up the charging system, for sure. |
#3
|
|||
|
|||
My plan is to use the starter from the 250 or 300 with the complete harness.
Gesendet von iPhone mit Tapatalk
__________________
4 strokes are only good for power generators |
#4
|
||||
|
||||
The 250 starter motor would be over kill.
There are kits available for shifter carts. http://www.shop.eshifterkart.com/Heg...it-HEGAR-S.htm |
#5
|
|||
|
|||
Hey thanks for the good links. I will search more the internet. Maybe it is easier than i thought.
Gesendet von iPhone mit Tapatalk
__________________
4 strokes are only good for power generators |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issue with ac-dc converting.. Please help pic inside | Jimmy | Enduro Electrical & Wiring | 23 | 12-13-2016 01:32 PM |
GasGas EC144 | Elvis74 | Used Bikes | 1 | 10-30-2015 05:15 PM |
Converting a 250 to a 300 | Niall-griffiths | Enduro Engine - 2 stroke | 14 | 11-16-2014 05:23 PM |
GasGas EC144 Ltd. Racing | Elvis74 | General Discussions & Announcements | 16 | 06-17-2011 08:19 AM |