|
Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
No service manuals - What a JOKE!!
I can see why GAS GAS is not growing like KTM - they don't even produce a service manual for there Enduro bikes - I had always been afraid of the day when I had trouble with my 06 450 FSE - finally its happened - and now I cant find any way to get the electrical - computer - service reading codes etc... I cant even find what readings for the coils. After research I found all Gas Gas produces is frame & body - and Engine - nothing on electrical - I live in Colorado and no one really knows about the fuel injected enduros - it also seems that no one in the USA knows much yet. Can anyone set me straight and tell me different?
|
#2
|
||||
|
||||
Have you tried to call GoFasters 1-877-363-8767 I bet they will help
__________________
02 EC 200 03 MC 250 88 VT 800 01 TXT 280 |
#3
|
|||
|
|||
Thanks for the info -- yes I have talked with them and they said I could send in the computer and they would put it in another bike to see if it would work - but they said there is no guides to trouble shoot the bike yet - I would like to do everything 1st before I send things in -
|
#4
|
||||
|
||||
There is a wiring diagram for an 05 here:
http://www.gasgasrider.org/forum/showthread.php?t=2466 but that is about it for electrical service stuff. What is the problem with the bike? Last edited by Qui-gon; 08-24-2009 at 05:19 PM. Reason: added wiring diagram link |
#5
|
||||
|
||||
Quote:
I will provide a few links for convenience, but you may want to browse through their other model years. Many items cross over between years. NOTE: the taller/workshop manual was only made in limited years. Same for us 2T guys. http://www.gasgasmotos.es Located under User Manuals > FSE/FSR 2005 Workshop/Service Manual: http://www.gasgasmotos.es/rcs/manual..._fse05_eng.zip EDIT: There is also some fuel injection software and maps listed on the GG corporate website. Another place to look is the GasGas USA website. Although, there may not be all manuals like the corporate site. http://www.gasgas.com/enduro_home.htm
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 |
#6
|
||||
|
||||
How to find the GasGas manuals....
Refer to yellow circled areas to find the manuals easily.
GasGas 4T Manuals: GasGas 2T Manuals:
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 |
#7
|
|||
|
|||
Anyone seen an engine manual for the 08/09 450's ?
|
#8
|
|||
|
|||
Thanks for the help - I have already downloaded the manuals. Nothing on the electrical system readings - Voltages - Coil -etc..
The bike is not triggering the fuel injection and not turning in the Speedo - it will crank the engine over but is getting the wrong signals. The cooling fan will even come on when you turn the key on and it is cold. |
#9
|
|||
|
|||
Ground issues will cause problems similar to what you describe when one device tries to ground through another. Start with the basics... remove all the plastic, tank, and seat and then remove and clean all the ground connections. Also check for wiring that appears too tight at loom splits and where the wiring is secured to differant areas of the frame, it can be damaged in those areas but not visibly.
But number one thing is make sure the battery is good. Batteries can turn to junk yet still have enough amperage to crank the engine. But there won't be enough voltage to fire the electronics. Take it somewhere and have it tested if you don't have a load tester to do it yourself. Or put a voltmeter on it while you crank the engine and watch the voltage. Most ECU electronics won't work without 12 volts where the old contact point and first generation electronic ignitions would fire with 9 volts. Low voltage will cause relay problems that can cause symptons like yours also but not as common. Good luck.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#10
|
||||
|
||||
Check the EFI relay under right hand number plate..it is a common problem and easy fix. There are also 2 fuses associated with the EFI. One is the supply line for the fuel pump.
__________________
06 Gas Gas FSE 450 USA 07 Gas Gas FSR 450 UK with motard and dirt wheels |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to find the GasGas manuals... | MattR | General Discussions & Announcements | 60 | 10-11-2022 09:20 AM |
Sachs manuals? | Krasi | Enduro Suspension | 2 | 11-07-2008 05:16 AM |
workshop manuals gone? | jostby | General Discussions & Announcements | 3 | 10-26-2008 12:29 PM |
All GG manuals available on GasGas USA website! | MattR | General Discussions & Announcements | 2 | 01-01-2008 08:38 AM |
Manuals | skid jackson | General Discussions & Announcements | 2 | 09-15-2006 10:09 AM |