![]() |
|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I recently purchased a 2013 EC300. I want to convert it to DC power. From my research I need to float the ground. Does anyone have the exact procedure to do it on this bike? Believe it to be a Kouksan 2K3 ignition. I already have the regulator/rectifier from trailtech.
|
#2
|
||||
|
||||
![]()
We talked about doing the floating ground in this thread.
http://www.gasgasrider.org/forum/showthread.php?t=528 But there is more (better) info in one of my later posts. I'll have to do some searching to find it. There is a wire in the 2K3 stator you have to de-solder and re-solder to another location on the stator. Then make sure all of your electronics, (except the CDI), to the battery + and - terminals. Make sure the isolate the rectifier/regulator housing from the frame and ground only to the battery. Maybe someone can search my past posts and find it. Good luck. Jeff |
#3
|
||||
|
||||
![]()
I've searched everywhere I can think of that I might have
posted the AC_DC conversion topic. ThumperTalk, SuperMotoJunkie, KDXForum and ADVRider I know nothing ever leaves the "WEB", but, I can't find anything I posted about doing the floating ground conversion. I also did a DC conversion on my KDX240SM without doing a floating ground to it's stator.... I did this maybe 10 years ago and my feeble mind can not recall the details. Sorry. |
#4
|
||||
|
||||
![]()
Send me a private message with an email address.
I found two .pdf files. One from Trail Tech and another from Baja Designs on how to do the floating ground on a 2K3 stator. If your 2013 GasGas has electric start, I doubt, these will be of help. the file sizes are: 2.03 mb and 1.47 mb. I was searching on their web sites and could not find either of these files there anymore. the must have deleted them. Good luck. |
#5
|
||||
|
||||
![]() Quote:
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#6
|
||||
|
||||
![]()
That is the one. Don't know why I could not find it.
I did not click the links to see if they still worked. Edit: yup.... Looks like the links are dead. If not, the OP can get a hold of me and I can forward the two files I have. Thanks SS109. |
![]() |
Tags |
2013 300e, electrical, gas gas 300, stator |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
AC/DC conversion - FLOATING ground | Bryan | Enduro Electrical & Wiring | 0 | 08-09-2020 08:41 PM |
DC conversion - not floating ground | johnm | Enduro Electrical & Wiring | 39 | 03-04-2020 11:11 AM |
Floating front Rotor | Dirt Dud | Enduro Chassis & Body | 7 | 01-05-2017 11:59 PM |
Estart require floating AC ground? | Brian | Enduro Electrical & Wiring | 5 | 06-03-2013 01:29 AM |
oversized floating rotor? | wheels7 | Enduro Chassis & Body | 3 | 02-21-2007 10:25 AM |