|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Carb set up please help
Apologies I am from the UK !!! I thought I would ask the experts >
I have a 2002 EC250,..Ineed some help with settig up the carb, I live 300 feet above sea level I am currently running all stock needle and jets 178 high and 38 pilot. In my manual it saysthe throttle valve cutaway is 7 what is this ? Are the jet sizes ok ? Should i change the stock needle if so what to? Where should the needle clip go ? What does LTR mean ? And finally do the reeds have to be flat against the valve body, or do they have a small gap, I have boysen reeds, and dont know if i should change them or not ? Thanks in anticipation guys, |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
RB carb | 101racing | Enduro Intake/Carburetion - 2 stroke | 15 | 05-22-2009 10:33 AM |
What carb do I have? | forgiven | Enduro Intake/Carburetion - 2 stroke | 1 | 05-04-2009 09:51 PM |
RB Carb Mod | RBD | Enduro Product Announcements | 10 | 06-29-2008 07:57 PM |
RB carb | spdfrek | Enduro Engine - 2 stroke | 2 | 03-22-2008 10:28 PM |